User manual

PC.doc-ACCESS Instructions for Use Page 9 of 19
PCDOCW: Selecting devices for generating a protocol
- Select the equipment or circuits from the list for which you want to generate a protocol. (This is identical to
reading data from file). For VDE0100 tests you can select all circuits belonging to one building by selecting
”Select Building”.
4.2.2 Reading of Data from the PROFITEST PSI-Modul /Profitest Master/
PROFITEST C / METRISO C / GEOHM C
- PC-settings:
- Connect thePROFITEST PSI / PROFITEST MASTER and PC (e.g. COM1) with the COM interface cable.
- Turn on the PROFITEST MASTER.
- Connect the PROFITEST C / METRISO C or GEOHM C and PC (e.g. COM1) with the infrard interface
cable.
- Turn on the PROFITEST C / METRISO C or GEOHM C
- The corresponding button reads out the data of the test instruments PROFITEST PSI-Modul / PROFITEST
MASTER, the button PROFITEST C also reads the data of the METRISO C oder GEOHM C
- In the following dialog save the data read out.
- Select the protocols to be documented in the follwing menu
You may group together the data of one building for VDE0100 tests by selecting the button "Building"..
Confirm with „OK“.