User manual

PC.doc-ACCESS Instructions for Use Page 8 of 19
4.2 Reading Data from the Device
4.2.1 Reading Data from the SECUTEST
- Connect the PSI Module to the free selected COM port of your PC
- Switch on the PSI Module (this applies only to the SECUTEST PSI Module if it is not connected to a tester
with power).
PCDOCW: Reading device data: file selection
- Select ”Read Secutest”.
- In the menu ”Save as” select the file name for storing the device data.
- Select ”OK”. The device data is stored.
Note: For device data without ID number the program automatically generates an ID number starting with ”@”,
e. g. ”@01”.
PCDOCW: Selecting the data format for SECUTEST
- For tests according to differing regulations with the SECUTEST, select what type of data you want to
document.