Datasheet

PAGE04 - 17
TEST INSTRUMENTS
Please refer to the data sheets for further technical specifications.
CLAMPS Current Sensor
Current clamp sensor: 1 mA ...15 / ... 150 A AC,
switchable
•
1 mA ... 15 A AC, 1 mV / mA
•
1 mA ... 150 A AC, 1 mV / A
Measuring
Range
CAT @ V
Wire Cross-
Section
Transmission
Factor
Frequency
Range
Intrinsic Uncertainty
± (% rdg. + mA)
1 mA ... 15 A AC /
1 A ... 150 A AC
III @ 300 15 mm dia.
1 mV /mA /
1 mV / A
45 ... 65 ...
500 Hz
2% + 0.15 mA /
2% + 0.1 A
SCOPE OF DELIVERY:
•
Current clamp sensor including permanently
attached safety cable with connector plug
Type Article
WZ12C Z219C
BRUSH PROBE Brush Probe
The brush probe is suitable for contacting
exposed conductive parts which rotate or vibrate
etc. during operation.
The brush is plugged onto the test probe.
•
Leakage current measurement (touch current)
•
Protective conductor resistance measurement
Type Article
Brush probe Z745G
PA4 Patient Connector Cable
Adapter cable for SECUTEST, SECULIFE ST for adapt-
ing the 2mm connector sockets at the SECUTEST /
SECULIFE ST to 4mm sockets and plugs, 1.5m long
with 12 cables, each with 4mm plug
Type Article
PA4 Z745L
TEMPERATURE SENSORS Standard Temperature Sensor
Standard PT 100 Temperature Sensor for Surface
and Immersion Measurements
Technical Data
Sensor element Pt 100
Length of sensor element / sensor 130 / 1000 mm
Temperature range, °C -40 ... +600
Accuracy per DIN EN 60751 / IEC 751 Class A
Intrinsic uncertainty at 0 °C / 600 °C 0.15 K
Transient recovery, T90 water/air 5 s / 30 s
Lead/insulation Strands: 2 ea. 0.35 sq. mm / PVC
Type Article
Z3409 GTZ3409000R0001
ACCESSORIES – CLAMPS, PROBES, SENSORS