Datasheet

3-349-536-03
3/10.15
GMC-I Messtechnik GmbH
METRAFLEX3000, 3001, 3001XBL, 3003, 3003XBL
Flexible AC Current Sensors
for Multimeters and Energy and Power Disturbance Analyzers
Application
The METRAFLEX are AC current probes utilising Rogowski princi-
ple. They can be used to measure AC current up to 3000 A by
being connected to an appropriate measuring device (multimeter,
data logger, power analyser etc.).
The flexible probe allows current measurements on conductors
that are hard to reach. To this end, the flexible current transform-
ers can be placed around one or several conductors of any type
and design (insulated cable, busbars, pipes).
Internal batteries allow for an independent operation of the mea-
suring amplifier.
METRAFLEX 3001, 3001XBL, 3003 and 3003XBL
The flexible current sensors METRAFLEX 3001(XBL) and
3003(XBL) can be used for long-term measurements by means of
external power supply.
For MAVOWATT 230/240/270/270-400 instruments, the current
sensors are supplied with voltage directly from the instrument. No
external power supply is required.
METRAFLEX 3003 and 3003XBL
The 3 current sensors of the METRAFLEX 3003(XBL) are
designed for AC measurements in any desired 3-phase system.
Technical Data
1)
under reference conditions
1)
under reference conditions
Current sensor /
Application
Multimeter
MAVOWATT 50
MAVOWATT
230, 240, 270
MAVOSYS 10
MAVOWATT
20, 30, 40, 70
MAVOSYS 10
METRAFLEX 3000 ••
METRAFLEX 3001
METRAFLEX 3001XBL
••
METRAFLEX 3003
METRAFLEX 3003XBL
••
Feature METRAFLEX 3000
METRAFLEX 3001
METRAFLEX 3003
Measuring ranges 30 A 300 A 3000 A
Scaling factor 10 100 1000
Output sensitivity 100 mV/A 10 mV/A 1 mV/A
Accuracy
(45 ... 65 Hz)
±1% of rdg.
±0.1 A
1)
±1% of rdg.
±1 A
1)
Noise 8 mV eff. 2 mV eff.
Output Connector 1 pair 4 mm safety plugs
Feature METRAFLEX 3001XBL
METRAFLEX 3003XBL
Measuring ranges 30 A 300 A 3000 A
Scaling factor 20 200 2000
Output sensitivity 50 mV/A 5 mV/A 0,5 mV/A
Accuracy
(45 ... 65 Hz)
±1% of rdg.
±0.1 A
1)
±1% of rdg.
±1 A
1)
Noise 8 mV eff. 2 mV eff.
Output Connector 4 pin Hypertronics plug
Wide range of applications, 3 measuring ranges 30 A/300 A/3000 A
AC and large bandwidth 10 Hz ... 20 kHz for harmonic analysis
Simultaneous measurement in all 3 phases (METRAFLEX 3003(XBL))
Precise measurements even with low currents, due to wide
dynamic range and high sensor sensitivity
Low conductor position influence and minimum stray field influence
Easy to operate in restricted space thanks to small sensor
cross-section of 9.9 mm and slim end cap of 13.6 mm
Safe handling even with protection gloves; opening of sensor
and measuring range setting in one-hand operation
Extremely long battery life of up to 2,000 hours,
(METRAFLEX 3003 and 3003XBL up to 1,000 hours)
External power supply for long-term measurements
METRAFLEX 3001XBL/3003XBL:
– MAVOWATT 230/240/270/270-400: power supply via MAVOWATT,
no further accessory required
– MAVOWATT 20/30/40/70 incl. DC/DC-Transformer ISOFLEX-MHXL
METRAFLEX 3001/3: via MAVOWATT 50, connector cable included
Current sensor with protection type IP65, measuring amplifier with IP40
High level of safety for the user, measurement category
1000V@CATIII, 600V @ CATIV and unlimited overload
capacity, rated for continuous use

Summary of content (4 pages)