User manual

GMC-I Gossen-Metrawatt GmbH
Thomas-Mann-Str. 16-20
90471 Nuremberg,
Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
www.gossenmetrawatt.com
Prepared in Germany • Subject to change without notice • PDF version available on the Internet
14 Order Information
Software
Further information regarding operating software and drivers is
available for download on the internet:
http://www.gossenmetrawatt.com
Accessories
15 Repair and Replacement Parts Service
DKD Calibration Laboratory* and Rental
Instrument Service
If required please contact:
GMC-I Gossen-Metrawatt GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nuremberg, Germany
Phone: [phone]
Fax: [phone]
e-mail [e-mail]
This address is only valid in Germany. Please contact our
representatives or subsidiaries for service in other countries.
* Calibration Laboratory for Electrical Quantities
DKD – K – 19701 accredited per DIN EN ISO/IEC 17025
Accredited quantities: direct voltage, direct current value, direct current resistance,
alternating voltage, alternating current value, AC active power, AC apparent power,
DC power, capacitance, frequency, temperature
Competent Partner
GMC-I Gossen-Metrawatt GmbH
is certified in accordance with
DIN EN ISO 9001:2000.
Our DKD calibration lab is accredited by the Physikalisch-
Technische Bundesanstalt (German Federal Institute of Physics
and Metrology) and the Deutscher Kalibrierdienst (German
Calibration Service) in accordance with DIN EN ISO/IEC 17025
under registration number DKD–K–19701.
We offer a complete range of expertise in the field of metrology:
from test reports and factory calibration certificates, right on up to
DKD calibration certificates.
Our spectrum of offerings is rounded out with free test equipment
management.
Our service department includes an on-site DKD calibration bench. If
errors are discovered during calibration, our specialized personnel
are capable of completing repairs using original replacement
parts.
As a full service calibration lab, we can calibrate instruments from
other manufacturers as well.
16 Product Support
If required please contact:
GMC-I Gossen-Metrawatt GmbH
Product Support Hotline
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
Description (abbreviated name) Article Number
SYSKON P1500-60-60 K353A
IEEE 488 interface (option) K384A
Description Note Article No.
RS 232 bus cable, 2 m For connecting a device to an
RS 232 interface (extension cable, 9-pin
socket / 9-pin plug connector)
GTZ 3241
000 R0001
IEEE - IEEE bus cable, 2 m For connecting a device to the
IEEE 488 bus system
K931A