User manual

60 GMC-I Gossen-Metrawatt GmbH
12 Operating Software
Comprehensive operating software is provided for the SYSKON
Konstanter (on the included CD-ROM, or can be downloaded
from our website).
The software is started by running the EXE file; no further
installation is required.
The software detects devices which are connected to the various
possible interfaces including USB, RS 232 and GPIB. Devices
detected by the software are identified and can be selected. If
more than one device is connected, the software can be started
several times in order to operate them.
The activated device logs on via the soft front panel and is thus
unequivocally recognized.
Further operation can be carried out as shown in the figures.