User manual

GMC-I Gossen-Metrawatt GmbH 57
10.4 Memory Structure
Setting / Actual Value Query
Setpoint specification
REPETITION STOP START TDEF MINMAX OCP OVSET (OVP) IL_H UL_H OUTPUT TSET ISET USET
SETUP Memory
Min-Max Meas. Value Memory
Current Measured
Default Device Settings
#12
UMAX
UMIN
IMAX
IMIN
UOUT
IOUT
POUT
• • •
• • •
UOUT > UMAX
UOUT < UMIN
IOUT > IMAX
IOUT < IMIN
*SAV n
*RCL n
SM_LOAD n 1)
Sequence Memory
STORE? n
e.g. USET w
e.g. USET?
STORE n,w1,w2,w3,txt
Mains power on & Pon rcl / SbY
*RST
Mains power on & Pon rSt
Mains power off
SM_STORE n
Active Device Setting
n = 1 ... 12 n = 1 ... 1536
e.g. UMAX?
e.g. UOUT?
T_MODE
Manual editing SEq_c n Clear contents of memory location n (CLR) SEq_c St-SP Clear memory contents from start to stop address (CLR) SEq_r n
Content of memory location n is cleared between start and stop addresses, memory locations up to stop address are reset (n -> n-1), an empty memory location is inserted at the stop address (CLR)
SEq_i n Empty memory location n inserted between start & stop addresses
memory locations up to stop address are added up (n -> n+1), the previous stop address memory location is deleted
FSET DISPLAY UI_C_SET
• • •
• • •
e.g. *LRN? n
Tolerance Band
Function
(MINMAX=ON)
U
OUT
>UI_C_SET (W2)
U
OUT
<UI_C_SET (W1)
I
OUT
>UI_C_SET (W4)
I
OUT
<UI_C_SET (W3)
e.g. CRB?
ISET TSET FSET USET
#1
*RCL99
(autom.)
3)
1
Or execution of a sequence function
2
If appropriately configured with “SIG123 ...”
3
After *RST, *RCL n
SIG x 2)
Main On & Pon r01 ... r12
#99
undo
Non-Volatile Memory Range
ISET TSET FSET USET
(MINMAX=ON)
Values