User manual

70 GMC-I Messtechnik GmbH
14 Order Information
Software
Further information regarding operating software and drivers is
available for download on the internet:
http://www.gossenmetrawatt.com
Accessories
15 Repair and Replacement Parts Service
Calibration Center* and Rental
Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nürnberg, Germany
Phone: [phone]
Fax: [phone]
e-mail [e-mail]
www.gmci-service.com
This address is only valid in Germany. Please contact our
representatives or subsidiaries for service in other countries.
* DAkkS Calibration Laboratory for Electrical Quantities
D-K-15080-01-01 accredited per DIN EN ISO/IEC 17025
Accredited quantities: direct voltage, direct current value, direct current resistance,
alternating voltage, alternating current value, AC active power, AC apparent power,
DC power, capacitance, frequency, temperature
Competent Partner
GMC-I Messtechnik GmbH
is certified in accordance with
DIN EN ISO 9001.
Our DAkkS calibration laboratory is accredited by the Deutsche
Akkreditierungsstelle GmbH (National accreditation body for the
Federal Republic of Germany) in accordance with DIN EN ISO/IEC
17025 under registration number D-K-15080-01-01.
We offer a complete range of expertise in the field of metrology:
from test reports and factory calibration certificates, right on up to
DAkkS calibration certificates.
Our spectrum of offerings is rounded out with free test equipment
management.
Our service department includes an on-site DAkkS calibration bench.
If errors are discovered during calibration, our specialized person-
nel are capable of completing repairs using original replacement
parts.
As a full service calibration lab, we can calibrate instruments from
other manufacturers as well.
16 Product Support
If required please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
17 Manufacturer’s Guarantee
The SYSKON Konstanter is guaranteed for a period of 2 years
after shipment. The manufacturer’s guarantee covers materials
and workmanship. Damages resulting from use for any other than
the intended purpose, as well as any and all consequential dam-
ages, are excluded.
Calibration is guaranteed for a period of 12 months.
Description (abbreviated name) Article Number
SYSKON P500-060-030 SYSTEM KONSTANTER K346A
SYSKON P800-060-040 SYSTEM KONSTANTER K347A
SYSKON P1500-60-60 SYSTEM KONSTANTER K353A
SYSKON P3000-060-120 SYSTEM KONSTANTER K363A
SYSKON P4500-060-180 SYSTEM KONSTANTER K364A
Option IEEE 488 interface for SYSKONKONSTANTER K384A
Description Note Article No.
RS 232 bus cable, 2 m For connecting a device to an
RS 232 interface (extension cable, 9-pin
socket / 9-pin plug connector)
GTZ32410
00R0001