User manual
GMC-I Messtechnik GmbH 45
4.9.6 Deleting the Contents of a Memory Location
Functions
• The contents of any desired individual memory location from
address 11 through 255 can be deleted.
• This has no effect on other memory addresses.
Settings
☞
Press the <SAVE> key.
! Sto and the last selected address appear at the display.
☞ Select the desired address with the <> key or the <> key.
☞ Press the
<SAVE> and <CE/LOCAL> keys simultaneously.
! A c (for clear) appears in the right-hand display next to the
selected memory location address number.
☞ Execute the delete command by pressing the <ENTER> key.
Figure 4.9.6 Deleting the Contents of an Individual Memory Location
4.10 Memory Recall with the <RCL> Key
• All device settings saved to memory with <SAVE> or STORE can
be recalled with the <RCL> key (RECALL), e.g. in order to
reconfigure the device. This memory is battery-backed.
• Empty memory locations are displayed as “----” “----”, and
cannot be recalled. ERR 24 appears briefly at the display, and
bit 5 is set in event register B.
• RCL can also be controlled via the analog interface (see
page 28 and chapter 5.8).
4.10.1 Recall from SETUP Memory
Addresses 1 through 10: complete basic device settings
USET OVset OCP START
ISET Ulim DELAY STOP
Tset Ilim MINMAX REPETITION
Sset OUTPUT Tdef
Settings
☞
Press the <RCL> key.
! rcl appears at the left-hand display, and the last selected
memory location number appears at the right-hand display.
☞ Select the desired address [1 ... 10] by pressing the <> key
or the <> key.
☞ Press the <ENTER> key.
! Iset and Uset settings saved to this address blink at the
display.
☞ Browse through this memory location with the <SELECT> key
in order to view the respective parameter settings (see chapter
4.8).
☞ All of the data saved to this memory location can now be
loaded as basic settings by once again pressing the <ENTER>
key.
☞ Press the <CE/LOCAL> key to abort the RECALL function.
☞ Press the <RCL> key in order to return to the memory location
selection function.
☞ The RECALL function can be exited by pressing any other
function key, or by turning the adjusting knob.
CE/LOCAL
FUNCTION RCL
Uout/Iout
Uset/Iset
FUNCTION
MENU
RCL
MENU
ENTER
SAVE
SAVE
&
Abort
Content of location 103 is deleted.
Example of deleting the content of an individual memory location:
01
10
occupied
011
255
occupied
occupied
empty
empty
start °1 sequence °1 stop °1
start °2 sequence °2 stop °2
current start
current stop
Sto
p
-1
S | t | o |
Y | Y | Y | c
Operation
"Deleting the
content of a
memor
y
"
YYY
The content of the selected memor
y
is em
p
t
y
!
Independent of current
start and stop address