User manual

Edited in Germany • Subject to change without notice • A pdf version is available on the Internet
GMC-I Gossen-Metrawatt GmbH
Thomas-Mann-Str. 16-20
90471 Nürnberg
• Germany
Phone: [phone]
Fax: [phone]
E-Mail: [e-mail]
www.gossenmetrawatt.com
9 Order Information
Mounting
Software
10 Repair and Replacement Parts Service,
DKD Calibration Lab* and Rental Service
If required please contact:
GMC-I Gossen-Metrawatt GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nürnberg
• Germany
Phone [phone]
Fax [phone]
E-Mail [e-mail]
This address is only valid in Germany. Please contact our
representatives or subsidiaries for service in other countries.
* Calibration Laboratory for Electrical Quantities
DKD – K – 19701 accredited per DIN EN ISO/IEC 17025
Accredited quantities: direct voltage, direct current value, direct current resistance,
alternating voltage, alternating current value, alternating current active power,
alternating current apparent power, DC power, capacitance, frequency
Competent Partner
GMC-I Gossen-Metrawatt GmbH is certified per DIN EN ISO 9001:2000.
Our DKD calibration lab is accredited by the Physikalisch-Technischen
Bundesanstalt (German Federal Institute of Physics and Metrology) and the
Deutscher Kalibrierdienst (German Calibration Service) in accordance with
DIN EN ISO/IEC 17025 under registration number DKD–K–19701.
We offer a complete range of expertise in the field of metrology: from test
reports and factory calibration certificates, right on up to DKD calibration
certificates.
Our spectrum of offerings is rounded out with free test equipment
management.
Our DKD calibration laboratory is part of our service department. If errors are
discovered during calibration, our specialized personnel are capable of
completing repairs using original replacement parts.
As a full service calibration lab, we can calibrate instruments from other
manufacturers as well.
Services
• Pick-up and delivery
• Express service (immediate, 24 hour and weekend service)
• Initial start-up and queries
• Device and software updates to current standards
• Replacement parts and repair
• Help desk
• Seminars with practical experience
• Testing in accordance with BGV-A2 (VBG 4)
• DKD calibration lab per DIN EN ISO/IEC 17025
• Service contracts and test equipment management
• Rental instrument service
• Disposal of old instruments
11 Product Support
If required please contact:
GMC-I Gossen-Metrawatt GmbH
Product Support Hotline
Phone [phone]
Fax [phone]
E-Mail [e-mail]
Description (abbreviated name) Type Article No.
SSP 120-20 32 N 20 RU 10 P K320A
SSP 120-40 32 N 40 RU 6 P K321A
SSP 120-80 32 N 80 RU 3 P K322A
SSP 240-20 32 N 20 RU 20 P K330A
SSP 240-40 32 N 40 RU 12 P K331A
SSP 240-80 32 N 80 RU 6 P K332A
SSP 320-32 32 N 32 RU 18 P K334A
IEEE 488 interface for SSP KONSTANTER types 32 N ...
Weight: 172 g,
Dimensions: 150 x 100 x 60 (L x W x H)
K380A
Description Note Article No.
19" rack adapter, 1 x 32 N Required for mounting one type 32 N ...
device to a 19" rack
Weight: 214 g (packed in plastic bag)
K990A
19" rack adapter, 2 x 32 N Required for mounting two type 32 N ...
device to a 19" rack
Weight: 50 g (packed in plastic bag)
K990B
Mains jumper cable, 0.4 m The cable is equipped with a 10 A inlet
plug and a 10 A inlet socket.
It is used for looping mains power through
when several devices are mechanically
combined into a multi-channel unit. In this
way, the complete unit requires only one
mains power cable.
Weight: 102 g (packed in plastic bag)
K991A
RS 232 bus cable, 0.4 m For looping through the RS 232 data line
when several series SSP 32 N devices are
mechanically combined into a multi-
channel unit (extension cable with 9-pin
socket and 9-pin plug connector).
Weight: 72 g (packed in plastic bag)
K931B
RS 232 bus cable, 2 m For connecting a device to an RS 232
interface (extension cable with 9-pin
socket and 9-pin plug connector).
Weight: 232 g (packed in plastic bag)
GTZ 3241 000
R0001
IEEE - IEEE bus cable, 2 m For connecting one device to the IEEE 488
bus system.
Weight: 358 g (packed in plastic bag)
K931A
Type Designation Article No.
K930D LabView, device driver for SSP KONSTANTER
series 120, 240, 320 and
series 500, 1000, 2000, 3000
K930D
K930E LabWindows / CVI, device driver for SSP
KONSTANTER, series 120, 240, 320, and
series 500, 1000, 2000, 3000
K930E
K930F HPVEE / VXI PnP, device driver for SSP
KONSTANTER, series 120, 240, 320, and
series 500, 1000, 2000, 3000
K930F