User manual

26 GMC-I Messtechnik GmbH
6 Accessories
Mounting
7 Order Information
* 115 V variant available with appendix -S001
5 Repair and Replacement Parts Service,
Calibration Center*
and Rental Instrument Service
When you need service, please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nuremberg, Germany
Phone [phone]
Fax [phone]
E-Mail [e-mail]
www.gmci-service.com
This address is only valid in Germany. Please contact our repre-
sentatives or subsidiaries for service in other countries.
* DAkkS Calibration Laboratory for Electrical Quantities
D-K-15080-01-01 accredited per DIN EN ISO/IEC 17025:2005
Accredited quantities: direct voltage, direct current value, direct current resistance,
alternating voltage, alternating current value, alternating current active power,
alternating current apparent power, DC power, capacitance, frequency,
temperature
Competent Partner
GMC-I Messtechnik GmbH
is certified in accordance with
DIN EN ISO 9001:2008.
Our DAkkS calibration laboratory is accredited by the Deutsche
Akkreditierungsstelle GmbH (National accreditation body for the
Federal Republic of Germany) in accordance with DIN EN ISO/IEC
17025:2005 under registration number D-K-15080-01-01.
We offer a complete range of expertise in the field of metrology:
from test reports and factory calibration certificates, right on up to
DAkkS calibration certificates.
Our spectrum of offerings is rounded out with free test equipment
management.
Our service department includes an on-site DAkkS calibration bench.
If errors are discovered during calibration, our specialized person-
nel are capable of completing repairs using original replacement
parts.
As a full service calibration lab, we can calibrate instruments from
other manufacturers as well.
6 Product Support
When you need support, please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone [phone]
Fax [phone]
E-Mail [e-mail]
Description Note Article No.
19" adapter 1 x 32 N Required for installing one type 32 N ... de-
vice to a 19" rack
Wight: 214 g (packed in plastic bag)
K990A
19" adapter 2 x 32 N Required for installing two type 32 N ...
devices to a 19" rack
Wight: 50 g (packed in plastic bag)
K990B
Mains jumper cable,
0.4 m long
The cable includes a 10 A inlet connector
and a 10 A socket for non-heating
apparatus. It is used for looping mains
power through when several devices are
mechanically combined into a multi-
channel unit. The resulting unit requires
only one power cable.
Wight: 102 g (packed in plastic bag)
K991A
Description
(abbreviated designation)
Type Article No.
SLP 120-20 32 N 20 R 10 K220A*
SLP 120-40 32 N 40 R 6 K221A*
SLP 120-80 32 N 80 R 3 K222A*
SLP 240-20 32 N 20 R 20 K230A*
SLP 240-40 32 N 40 R 12 K231A*
SLP 240-80 32 N 80 R 6 K232A*
SLP 320-32 32 N 32 R 18 K234A*