User manual

26 GMC-I Gossen-Metrawatt GmbH
6 Accessories
Mounting
7 Order Information
5 Repair and Replacement Parts Service,
DKD Calibration Lab* and Rental Service
If required please contact:
GMC-I Gossen-Metrawatt GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nuremberg, Germany
Phone [phone]
Fax [phone]
E-Mail [e-mail]
This address is only valid in Germany. Please contact our repre-
sentatives or subsidiaries for service in other countries.
* Calibration Laboratory for Electrical Quantities
DKD – K – 19701 accredited per DIN EN ISO/IEC 17025:2005
Accredited quantities: direct voltage, direct current value, direct current resistance,
alternating voltage, alternating current value, alternating current active power,
alternating current apparent power, DC power, capacitance, frequency, temperature
Competent Partner
GMC-I Gossen-Metrawatt GmbH is certified per DIN EN ISO 9001:2000.
Our DKD calibration lab is accredited by the Physikalisch-Technischen
Bundesanstalt (German Federal Institute of Physics and Metrology) and the
Deutscher Kalibrierdienst (German Calibration Service) in accordance with
DIN EN ISO/IEC 17025 under registration number DKD–K–19701.
We offer a complete range of expertise in the field of metrology: from test
reports and factory calibration certificates, right on up to DKD calibration
certificates.
Our spectrum of offerings is rounded out with free test equipment
management.
Our DKD calibration laboratory is part of our service department. If errors are
discovered during calibration, our specialized personnel are capable of
completing repairs using original replacement parts.
As a full service calibration lab, we can calibrate instruments from other
manufacturers as well.
6 Product Support
If required please contact:
GMC-I Gossen-Metrawatt GmbH
Product Support Hotline
Phone [phone]
Fax [phone]
E-Mail [e-mail]
Description Note Article No.
19" adapter 1 x 32 N Required for installing one type 32 N ...
device to a 19" rack
Wight: 214 g (packed in plastic bag)
K990A
19" adapter 2 x 32 N Required for installing two type 32 N ...
devices to a 19" rack
Wight: 50 g (packed in plastic bag)
K990B
Mains jumper cable,
0.4 m long
The cable includes a 10 A inlet connector
and a 10 A socket for non-heating
apparatus. It is used for looping mains
power through when several devices are
mechanically combined into a multi-
channel unit. The resulting unit requires
only one power cable.
Wight: 102 g (packed in plastic bag)
K991A
Description
(abbreviated designation)
Type Article No.
SLP 120-20 32 N 20 R 10 K220A
SLP 120-40 32 N 40 R 6 K221A
SLP 120-80 32 N 80 R 3 K222A
SLP 240-20 32 N 20 R 20 K230A
SLP 240-40 32 N 40 R 12 K231A
SLP 240-80 32 N 80 R 6 K232A
SLP 320-32 32 N 32 R 18 K234A