Datasheet

PAGE04 - 16
TEST INSTRUMENTS
www.gossenmetrawatt.com
EL1 / PRO-CH Adapter
EL1 PRO-CH
Adapter for Testing Single-Phase Extension Cords
•
Connector cable to the test instrument with handle /
socket for plug inserts
•
Pro-Schuko plug insert
•
Plug insert for non-heating devices
•
EN60320 C13 to EN60320 C6 plug adapter
(non-heating devices, 10A to 2.5A IBM plug)
•
Additional country-specific inserts available as well.
Not usable for high-voltage test!
PRO-CH plug insert
Plug insert for using the EL1 adapter in Switzerland
Type Article
EL1 Z723A
PRO-CH GTZ3225000R0001
CEE16 / CEE32 Adapter Cable
Adapter cable, red CEE 5-pole 16A plug to red
CEE 5-pole 32A coupling, 0.5m, 5 x 1.5 sq. mm
Type Article
CEE16/CEE32 adapter cable Z750F
KS13 Cable Set
Cable Set for Connecting Test Instruments to the
Mains
Cable set for connecting test instruments to the
mains without earthing contact sockets, and for
connecting DUTs – consisting of:
•
Coupling socket with 3 permanently connected
cables
•
3 measurement cables, 3 plug-on pick-up clips
•
3 plug-on test probes
Type Article
KS13 GTY3624065P01
SK2 / SK5 Probe Cable for Protective Conductor Measurement
SK2 : Probe including test probe and 2 meter probe
cable (not coiled), suitable for high-voltage
testing
SK2W: Probe cable with test probe and 2 meter
probe cable (coil cable) suitable for high-
voltage testing
SK5: 5 meter probe cable for protective conductor
measurement
SK5-SW: 5 meter probe cable for protective
conductor measurement (cable plus
software for SECUTEST SIII+ and
SECUTEST S2N+W)
•
Automatic recognition of changing measuring
points as software upgrade
•
Go/no-go indication display
Type Article
SK2 Z745D
SK2W Z745N
SK5 Z745O
SK5-SW Z745K
RS232 – USB CONVERTER Interface Converter
The interface converter is used to connect test in-
struments and multimeters with appropriate adapters
including an RS232 port to PCs which are equipped
with USB ports only.
Type Article
RS232 – USB converter Z501L
ACCESSORIES – ADAPTERS, CABLES, USB CONVERTER