Operation Manual

GMC-I Messtechnik GmbH 69
22.4 Device Return and Environmentally Compatible Disposal
The test instrument is a category 9 product (monitoring and control instru-
ment) in accordance with ElektroG (German Electrical and Electronic De-
vice Law). This device is not subject to the RoHS directive.
We identify our electrical and electronic devices (as of August
2005) in accordance with WEEE 2002/96/EG and ElektroG
with the symbol shown to the right per DIN EN 50419 .
These devices may not be disposed with the trash.
Please contact our service department regarding the return of old de-
vices, address see chapter 23.
23 Repair and Replacement Parts Service
Calibration Center* and Rental Instrument Service
If service is required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Strasse 20
90471 Nürnberg · Germany
Phone [phone]
Fax [phone]
E-Mail [e-mail]
www.gmci-service.com
This address is only valid in Germany.
Please contact our representatives or subsidiaries for service in other
countries.
* Calibration Laboratory for Electrical Quantities
DKD – K – 19701 accredited per DIN EN ISO/IEC 17025:2005
Accredited measured quantities: direct voltage, direct current values,
DC resistance, alternating voltage, alternating current values, AC active power,
AC apparent power, DC power, capacitance, frequency and temperature
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with
DIN EN ISO 9001:2008.
Our DKD calibration laboratory is accredited by the Deutscher Kalibrierdi-
enst (German Calibration Service) in accordance with DIN EN ISO/
IEC 17025:2005 by under registration number DKD–K–19701.
We offer a complete range of expertise in the field of metrology: from test
reports and proprietary calibration certificates right on up to DKD calibration
certificates.
Our spectrum of offerings is rounded out with free test equipment manage-
ment.
An on-site DKD calibration station is an integral part of our service depart-
ment. If errors are discovered during calibration, our specialized personnel
are capable of completing repairs using original replacement parts.
As a full service calibration laboratory, we can calibrate instruments from
other manufacturers as well.