Operation Manual

GMC-I Messtechnik GmbH 59
18 Storing Test Results and Printing in Report Form
You can shift to the Protocol menu from
any of the displayed test results (1
st
page) with the help of the key.
Storing to the Test Instrument
Measurement results for the current
test can be stored to the test instru-
ment, the results of the current test can
be printed out to the corresponding re-
port form, previously stored test results
can be queried (scroll: Feature KB01,
see chapter 16) and all stored mea-
surement results can be read out from
this menu.
The report template automatically
complies with the standard of the se-
lected switch position, provided that
parameter „Select template“ has been
deactivated.
If parameter „Select template“ is activated, it is possible to select one of 5
different report templates. Templates 1 to 4 can be modified via the up-
date and options installation program SECU-Up, see chapter 16.2.2.
Storing to the SECUSTORE Storage Adapter (Accessory)
Connect the SECUSTORE storage adapter with the test instrument via the
RS232 interface. The (P)SI module may not be connected.
Direct Print-Out (Feature KE01 or SECUTEST SII I+H, in each case in Combination
with a PSI Module or SECUSTORE Storage Adapter)
After completion of each test (individual test or at the end of a test
sequence), test results are read out directly via the RS232 interface.
When the PSI module is connected (accessory, not part of the standard
equipment), the result is directly printed on paper. When the SECUSTORE
storage adapter is connected, the test result is stored to memory.
(read out)