Operation Manual

44 GMC-I Messtechnik GmbH

15.6 Testing Devices in Accordance with DIN VDE 0701-0702:2008

The following measurements can be performed in accordance with the

above mentioned standard:

• Protective conductor R

(permanent connection or with plug)

Test current: DC 200 mA

Test current: 10 A AC

(Feature G00

)

Test current: 25 A AC

(Feature G01 or

SECUTEST SIII+H

)

• Insulation measurement R

INS

(can be deactivated, e.g. if danger

exists that voltage sensitive components in data processing systems

might be damaged) plus equivalent leakage current

• Contact current for safety class II

• Residual current

Check connection parameters and start test.

To Socket This is the default setting. Refer to chapter 7 on page

17 for other types of connection.

Class If the DUT has been connected to the test socket,

safety class recognition is performed (SC I or SC II).

Otherwise, the safety class must be specified manu-

ally.

Ext. Cable

WITH EL1

x: Extension cables or connector cables which are

longer than 5 m can be tested with the help of the

EL1 adapter (optional), either separately or in combi-

nation with a device, see chapter 15.7.

R-INS LN-SL x: Insulation resistance measurement is performed.

ID No. See parameters database in chapter 15.2 on page

37.

Setup See chapter 15.2 on page 37 regarding setup of the

measuring sequence.