Datasheet
SECUTESTSI+
Memory and Input Module
2 GMC-I Messtechnik GmbH
Applicable Regulations and Standards
Data Memory (only SECUTEST .../SECULIFE ST)
RAM (Data) 100 kByte
up to 500 tests, depending on
the scope of master data
Real-time clock
with date function buffered by a permanently installed
lithium battery
RS232 Data Interface
Type RS232, serial, per DIN 19241
Operating voltage
6.5 V ... 12 V for connection to test instrument
Current consumption 40 mA typical
Baud rate 9600 bauds
Parity No
Data bits 8
Stop bit 1
USB Data Interface
Type
USB 1.1
Operating voltage when connected to the test instrument:
5 V DC 10% from the RS232 interface of
the test instrument
when connected to a PC:
(without connection to the test instrument):
5 V DC
10% from the USB interface of the
PC
Current consumption 40 mA typical
Baud rate 9600 bauds
Parity none
Data bits 8
Stop bit 1
Terminal assignment
Type B 4 pin,
1: VCC, 2: D–, 3: D+, 4: GN
Reference Conditions
Operating voltage
for connection
to test instrument 9 V 0.5 V DC or
8V 0.5 V rectified
Ambient
temperature +23 C 2K
Relative humidity 40 ... 60%
Ambient Conditions
Operating temperature
0 C ... 40 C
Storage temperature - 20 °C ...+ 60 °C; except batteries
Relative humidity max. 75%, no condensation allowed
Elevation max. 2000 m
Deployment indoors
Electromagnetic Compatibility (EMC)
Interference emission EN 61326-1:2006 class B
Interference immunity EN 61326-1:2006
Auxiliary power
Voltage Supply
for connection to
the test instruments via pin 9 of the RS232 interface
6.5 V ... 12 V, typically 9 V
Mechanical Configuration
Protection IP20 for the housing
Dimensions 240 mm x 81 mm x 40 mm
(without knurled screws and ribbon cables)
Weight approx. 0.4 kg
Scope of Supply
1 SI module
1 Operating instructions
The RS232 interface description is available on our website
www.gossenmetrawatt.com.
Accessories
see order information
IEC/EN 61 010-1:2001
VDE 0411-1:2002
Safety requirements for electrical measurement, control
and laboratory devices – General requirements
DIN EN 60 529/
VDE 0470 Part 1
Test instruments and test procedures,
protection provided by enclosures (IP code)
DIN EN 61326-1
VDE 0843-20-1
Electrical equipment for measurement, control and labo-
ratory use – EMC requirements – Part 1: General re-
quirements