Datasheet

SECUTEST PSI
Memory, Input and Printer Module
2 GMC-I Messtechnik GmbH
Applied rules and standards
Printer
Print mechanism 4-pin matrix printer
Printing width 40 characters per line
Real-time clock
with date function battery buffered
Data memory (only SECUTEST.../SECULIFE ST)
RAM (Data) 100 kByte
up to 300 tests, depending on
the scope of master data
Data interface
Type RS232, serial, per DIN 19241
Baudrate 9600 bauds
Parity No
Data bits 8
Stop bit 1
Reference conditions
Battery voltage 6 V 0.5 V
Auxiliary power 9 V 0.5 V DC or
8V 0.5 V rectified
Ambient
temperature +23 C 2K
Relative humidity 50 % 5%
Ambient conditions
Operating Temp. 0 C ... 40 C
Storage Temp. - 20 °C ...+ 60 °C; except:
batteries, paper and ribbon
Relative Humidity max. 75%, no condensation allowed
Elevation max. 2000 m
Deployment indoors
Auxiliary power
Voltage supply
With connection to
the test instruments across PIN 9 of the RS232 interface
6.5 V ... 12 V typically 9 V
With battery
operation 4 each 1.5 V-mignon cells
(alkaline-manganese) according to
IEC LR 6
Power consumption
Standby
(Data buffering), 5 A ... 200 A
Protocol printing < 500 mA
Paper feed < 200 mA
Data transmission
to PC < 100 mA
Mechanical configuration
Protection type IP20 for the case
Dimensions 240 mm x 81 mm x 40 mm
(without knurled screws and ribbon cables)
Weight approx. 0.8 kg
Scope of supply
1 PSI module
2 Rolls of paper (one as spare)
1 Ribbon
1 Copy of operating instructions incl. interface description
Accessories
see order information
IEC/EN 61 010-1:2001
VDE 0411-1:2002
Safety requirements for electrical measurement, control
and laboratory devices – General requirements
DIN EN 60 529/
VDE 0470 Part 1
Test instruments and test procedures,
protection provided by enclosures (IP code)
DIN EN 61326-1
VDE 0843-20-1
Electrical equipment for measurement, control and labo-
ratory use – EMC requirements – Part 1: General re-
quirements