Datasheet

ManualsBrandsGossen Metrawatt ManualsModulesMemory, Input and Printer Module

SECUTEST PSI

Memory, Input and Printer Module

3-348-785-03

7/8.10

GMC-I Messtechnik GmbH

Applications

The PSI (Printer Storage Interface) module SECUTEST PSI is a

special accessory for the test instruments of the SECUTEST.../

SECULIFE ST, PROFITEST 204 and MAVOWATT series.

It is installed in the lid of the test instrument and fastened with two

knurled screws.

The test results determined with the test instruments are directly

transferred to the PSI module via the RS232 interface.

The test results can be printed on site with the respective time

and date in the form of clear and document-safe measuring and

test protocols.

Transmission of stored data to the PC (only SECUTEST.../SECULIFE ST)

The PSI module is equipped with an RS232 interface. The inter-

face allows for subsequent uploading of stored data to a PC inde-

pendent of the test instrument, where they can be processed with

the PS3, PC.doc-WORDEXCEL, ELEKTROmanager, PRO-

TOKOLLmanager or PATmanager software programs.

Barcode scanner option (only SECUTEST.../SECULIFE ST)

Barcode or RFID scanner (accessory) can be linked to the RS232

connection of the PSI module. The information available in the

form of barcodes or RFID tags can be safely integrated in the test

protocols in an efficient and easy manner. This kind of data input

enables the user to record substantial data quantities in a timesa-

ving and cost-effective manner, e.g. for series measurements of

instruments provided with barcodes or RFID tags.

Comparison of Memory Adapters / Testers with memory option

* only function when used with PROFITEST 204 und METRISO 5000 D-PI

Features

SECUSTORE (Z745U)

SECUTESTSI (M702F)

SECUTEST PSI (GTM5016000R0001)

SECUTEST SIII+. . . Feature KB01

SECULIFE ST

SECUTEST S2N+ Option DBmed

Integrated printer for recording charts — —  ——

Annotations via keyboard —  ——

Data memory (flash)  —— — —

Data memory (battery buffered) —   

Protocol functions  ——

Statistical evaluation of up to 8 instrument classes —  ——

Data transmission to PC   

Connection of a barcode scanner   

Connection of an RFID scanner   

Storage of function test values  ——

Storage of comments on DUT —  ——

•Matrix printer

• Real-time clock with date function

battery buffered

• Data memory only SECUTEST.../SECULIFE ST

Measurement values can be stored for up to 300 protocols

• Alphanumeric keyboard

Test results can be annotated for the SECUTEST.../

SECULIFE ST, METRISO 5000 D-PI and PROFITEST 204

test instruments, e.g. specific data on system, DUT, customer

and repair

Summary of content (4 pages)

PAGE 1
SECUTEST PSI Memory, Input and Printer Module Transmission of stored data to the PC (only SECUTEST.../SECULIFE ST) The PSI module is equipped with an RS232 interface. The interface allows for subsequent uploading of stored data to a PC independent of the test instrument, where they can be processed with the PS3, PC.doc-WORDEXCEL, ELEKTROmanager, PROTOKOLLmanager or PATmanager software programs. Barcode scanner option (only SECUTEST...
PAGE 2
SECUTEST PSI Memory, Input and Printer Module Applied rules and standards Auxiliary power IEC/EN 61 010-1:2001 VDE 0411-1:2002 Safety requirements for electrical measurement, control and laboratory devices – General requirements DIN EN 60 529/ VDE 0470 Part 1 Test instruments and test procedures, protection provided by enclosures (IP code) Voltage supply With connection to the test instruments DIN EN 61326-1 VDE 0843-20-1 Electrical equipment for measurement, control and laboratory use – EMC require
PAGE 3
SECUTEST PSI Memory, Input and Printer Module Recording of the measured results (only SECUTEST.../SECULIFE ST) Statistical evaluation of the measured results (only SECUTEST.../SECULIFE ST) The result of the last test at a time can be entered into the PSI module where it can be stored under an ident number and annotated. In addition, the measured results as well as further information can be shown on the LC display of the test instrument and printed out on the PSI module.
PAGE 4
SECUTEST PSI Memory, Input and Printer Module Order Information Designation Type Article number PSI module with the languages D (German), GB (English), F (French), NL (Dutch), I (Italian), E (Spanish) and CZ (Czech), including 2 rolls of paper, 1 ribbon cassette, batteries and operating instructions SECUTEST PSI GTM5016000R0001 Accessories Set with 10 rolls of paper for SECUTEST PSI (1 roll approx. 6.