Datasheet

ManualsBrandsGossen Metrawatt ManualsElectrical & Electronic Test InstrumentsElectrical safety tester

3-349-753-03

17/4.17

GMC-I Messtechnik GmbH

SECUTEST BASE / PRO and SECULIFE ST BASE

Test Instruments for Measuring Electrical Safety of Devices

per VDE 0701-0702, IEC 62353 and IEC 60974-43

DAkkS Calibration Certificate

German

Accreditation Body

D-K-15080-01-01

as Standard Feature

optional

Additional Functions SECUTEST PRO

•

Remote control

via PC software possible (new as of version 1.6.0)

• Additional database elements for property, building, floor, room

for a better structuring of data and additional fields for depart-

ment and cost center

•

Multi-print

– read-out of all test reports which are available for a device

under test with 1 finger tip (at a connected Z721S thermal printer)

•Design user-created report templates with „SequenceDesigner“

software (free available from myGMC)

•

RFID transponder

, read/write (Z751R,S,T), with SCANBASE RFID Z751E

(UID or memory depending on how the reader is programmed)

•XML data export to a USB stick

•ETC or USB stick

data import

of all important data into the tester

•Design user-created sequences with “Report Designer” software

(free available from myGMC)

Added Feature SECULIFE ST BASE

SECULIFE ST BASE corresponds to the range of functions offered by

SECUTEST PRO, but is additionally endowed with antimicrobial

properties. This is to curb the growth of germs, counteract micro-

bial colonization or kill microorganisms.

Standards for the Use of SECUTEST BASE/PRO and

SECULIFE ST BASE Test Instruments

Overview of Differences in Features

* for voltage measurements or connecting a WZ12C current clamp or AT3 adapter

as well as for temperature measurement via RTD

Testing after Repairs /

Periodic Testing

DUTs to be tested

in accordance

with the following

standards

DIN VDE 0701-0702

IEC 62353

DIN EN 62353

(VDE 0751-1)

IEC 60974-4

DIN EN 60974-4

VDE 0544-4

Electric devices: e. g.

Work devices

Mains operated electronic devices

Hand-held electric tools

Extension cords

Household appliances

Data processing devices

•

Electrical medical devices •

Arc welding units ••

Feature SECUTEST BASE

SECUTEST BASE10

SECUTEST PRO

SECULIFE ST BASE

10 A RPE test current

••

Touch keyboard

•

test probe

•

Voltage measuring inputs *

•

Database expansion

•

• 8 preconfigured test sequences for quickly testing simple

operating equipment

• One universal, adjustable test sequence

• One test sequence executed with individual measurements

• Suitable for use by instructed persons

• Enormous data maintenance and storage concept for automated

test sequences and measurements for up to 50,000 data records

• Fast access to mesurement and test functions with double

rotary switch, direct selection keys and softkeys

• High-resolution, brilliant 4.3" TFT color display

• Unique multiple measurement allows convenient recording of

several measuring points.

• Automatic DUT connection and protection class detection

• Compact, impact resistant housing with integrated rubber protector

• Comprehensive, legally secure preparation of test reports

• Modern interfaces:

for data entry (two USB A) and data exchange (one USB B)

• Extensive setting options for international use

(language, keyboard, character set, date, time)

• Measurement of PRCDs of PRCD standard type, SPE-PRCD,

PRCD-S and PRCD-K within test sequences in accordance

with DIN VDE_0701-0702-PRCD.

Summary of content (12 pages)

PAGE 1
SECUTEST BASE / PRO and SECULIFE ST BASE Test Instruments for Measuring Electrical Safety of Devices per VDE 0701-0702, IEC 62353 and IEC 60974-43 • • • • • • • • Additional Functions SECUTEST PRO • Remote control via PC software possible (new as of version 1.6.
PAGE 2
SECUTEST BASE / PRO and SECULIFE ST BASE Test Instruments for Measuring Electrical Safety of Devices Overview of Features Included with SECUTEST BASE and SECUTEST PRO Test Instruments Switch Measuring Function, SetTest Current/Voltage ting Single measurements, rotary switch level: green RPE Protective conductor resistance RPE I RISO RISO UISO IPE IPE IPE~ IPE= ULN IB IT IT~ IT= ULN IG IE IE~ IE= ULN IA IP U ta 4 P IA UA IP IP~ IP= ULN U U~ U= U U~ U= tB ULN Measurement Type Connection Type PE(
PAGE 3
SECUTEST BASE / PRO and SECULIFE ST BASE Test Instruments for Measuring Electrical Safety of Devices Data Interfaces Structures set up in, and measurement data saved to the test instrument can be imported to ETC report generating software via the USB slave port. Data can then be archived at the PC, comments can be added with the software and reports can be generated.
PAGE 4
SECUTEST BASE / PRO and SECULIFE ST BASE Test Instruments for Measuring Electrical Safety of Devices Backlit Multi-Display Samples Single Test – Initial Screen with Parameters Display Help – Schematic and Wiring Diagram Scope of Delivery Standard version (country-specific) 1 SECUTEST BASE, SECUTEST PRO or SECULIFE ST BASE test instrument 1 Mains power cable 1 Test probe, 2 m, not coiled 1 USB cable, USB A to USB B, 1.
PAGE 5
SECUTEST BASE / PRO and SECULIFE ST BASE Test Instruments for Measuring Electrical Safety of Devices Characteristic Values Voltage measurement Function test Tests, 62638 (DIN VDE 0701-0702) / IEC 62353 (VDE 0751) Function tA PRCD IClamp Measured Quantity Protective conductor resistance RPE Insulation resistance 9 RISo Leakage current, alternative measurement 2 IPE, IB, IG, IA Leakage current, direct measurement 3 IPE, IB, IG, IA, IP Leakage current, differential current measurement 4 IPE, IB, IG Line
PAGE 6
SECUTEST BASE / PRO and SECULIFE ST BASE Test Instruments for Measuring Electrical Safety of Devices Influencing Quantities and Influence Error Influencing Quantity / Sphere of Influence Test voltage Designation Influence Error per ± … % rdg. DIN VDE 0404 Change of position E1 — Change to test equipment supply voltage E2 2.5 E3 Specified influence error valid starting with temperature changes as of 10 K: Temperature fluctuation 0 … 40 °C Measuring category Pollution degree Safety shutdown 2.
PAGE 7
SECUTEST BASE / PRO and SECULIFE ST BASE Test Instruments for Measuring Electrical Safety of Devices Accessories (not included) Z751A Barcode Reader For connection to the USB master port at the test instrument, and for reading in barcodes. This makes it possible to conveniently insert the ID numbers of DUTs into single measurements and test sequences. This device is based upon the concept of an instinctive scanning distance and provides best possible reading performance.
PAGE 8
SECUTEST BASE / PRO and SECULIFE ST BASE Test Instruments for Measuring Electrical Safety of Devices SECU-cal 10 (Z715A) Calibration Adapter The calibration adapter is used for testing the measuring uncertainty of test instruments in accordance with DIN VDE 0701-0702 / IEC 62353 (VDE 0751).
PAGE 9
SECUTEST BASE / PRO and SECULIFE ST BASE Test Instruments for Measuring Electrical Safety of Devices Order Information SECUTEST BASE, SECUTEST PRO and SECULIFE ST BASE Standard Models Standard Model Article Number Features SECUTEST BASE M7050-V001 Schuko variant (test socket and mains plug), selectable user interface language (default setting: German), protective conductor test current: 200 mA, calibration certificate in D/GB/F, printed condensed operating instructions in German (features differing from
PAGE 10
SECUTEST BASE / PRO and SECULIFE ST BASE Test Instruments for Measuring Electrical Safety of Devices Customizable Test Instruments Please note: When ordering via features, please do not fail to quote the complete order number (not the standard model). Features with selection option o „available“ can be freely selected. Only one selection is possible per feature character.
PAGE 11
SECUTEST BASE / PRO and SECULIFE ST BASE Test Instruments for Measuring Electrical Safety of Devices Order Information for Accessories Designation Type Article number PC analysis software Further information regarding software is available on the Internet at: http://www.gossenmetrawatt.com (→ Products → Software → Software for Testers) Mains power cable Cable set for connecting test instruments to the mains without using a an earthing contact outlet, and for connecting DUTs.
PAGE 12
SECUTEST BASE / PRO and SECULIFE ST BASE Test Instruments for Measuring Electrical Safety of Devices Designation Data Storage Database expansion for SECUTEST BASE(10): data import, sequence import, multi print Report Generating Accessories RFID-System RFID read/write for USB connection (frequency: 13.56 MHz) RFID tags per ISO 15693, dia. approx. 22 mm, self-adhesive, 500 pcs. RFID tags per ISO 15693, dia. approx. 30 mm, thickness 2 – 3 mm with 3 – 4 mm hole 500 pcs.