User Manual
GMC-I Messtechnik GmbH 51
15 Repair and Replacement Parts Service
Calibration Center* and Rental Instrument
Service
If required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Strasse 16-20
90471 Nürnberg, Germany
Phone: +49-911-817718-0
Fax: +49-911-817718-253
e-mail service@gossenmetrawatt.com
www.gmci-service.com
This address is only valid in Germany. Please contact our repre-
sentatives or subsidiaries for service in other countries.
* DAkkS calibration laboratory for electrical quantities,
registration no. D-K-15080-01-01,
accredited per DIN EN ISO/IEC 17025:2005
Accredited quantities: direct voltage, direct current value, direct current resistance,
alternating voltage, alternating current value, AC active power, AC apparent pow-
er, DC power, capacitance, frequency and temperature
Competent Partner
GMC-I Messtechnik GmbH is certified per
DIN EN ISO 9001:2008.
Our DAkkS calibration laboratory is accredited by the Deutsche
Akkreditierungsstelle GmbH (national accreditation body for the
Federal Republic of Germany) under registration number D-K-
15080-01-01 in accordance with DIN EN ISO/IEC 17025:2005.
We offer a complete range of expertise in the field of metrology:
from test reports and factory calibration certificates right on up to
DAkkS calibration certificates. Our spectrum of offerings is
rounded out with free test equipment management.
An on-site DAkkS calibration station is an integral part of our ser-
vice department. If errors are discovered during calibration, our
specialized personnel are capable of completing repairs using
original replacement parts.
As a full service calibration laboratory, we can calibrate instru-
ments from other manufacturers as well.
16 Product Support
If required please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone: +49-911-8602-0
Fax: +49 911 8602-709
e-mail: support@gossenmetrawatt.com