User Manual

18 GMC-I Messtechnik GmbH
8 Single Measurements
8.1 General
• The desired measurement is selected with the help of the
green pointer on the rotary switch and the green semicircle.
• The respective measurement is configured with the help
of the softkeys. The parameter settings can be
accessed by pressing the softkey with the symbol
shown at the right.
• No limit values can be specified for single measurements, and
thus there’s no evaluation.
• Checking is performed before each measurement in order to
assure a trouble-free sequence, and to prevent any damage
to the DUT.
• Single measurements can be saved to memory. The assign-
ment of an ID number is possible to this end.
• Single measurements can be combined into measurement
series.
• Mains power can be connected to the DUT with the desired
polarity by making a pre-selection in the parameter settings.
• Measured values are checked for plausibility.
Figure 7 Configuring Single Measurements (parameters entry and display)
Measurement Status – Progress Bar
Measurement standstill (static line)
Measurement in progress
(space is gradually filled in, pulsating)
Select parameter settings
Initial Display, Single Measurement
Delete measurement data
Offset
Connection Type
Test Current
Probes/sensors: white = required for this measurement
Measurement
– Start
– Stop
Probes/sensors: green = connected to test instrument
Momentary Measured Value
Scroll through parameter pages
Select measuring parameter directly
Select measuring parameter directly
Select measuring parameter directly
Accept changes and
Measuring Parameters Display, Single Meas.
jump back to initial display
Current/Maximum Number of Parameter Pages
ESC: discard change and
jump back to initial display
Selected
parameter value
Parameters preview,
next page
Selectable
parameter
Delete character
Accept character at
Scroll left
Numeric Entry (for parameters including UnInt, Offset ...)
left of the cursor
Accept entry
Scroll up
Scroll down
and exit keyboard
Discard entry
and exit keyboard
cursor position
Switch between display
and numeric entry
Scroll right
Show keyboard /
hide keyboard
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM