Datasheet
GMC-I Messtechnik GmbH 9
SECUTESTBASE, BASE10 and XTRA
Test Instruments for
Measuring
Electrical Safety of Devices
Order Information for Accessories
D
Data sheet available
For additional information regarding accessories please refer to
• Measuring Instruments and Testers catalog
• www.gossenmetrawatt.com
Designation Type Article number
PC analysis software
Further information regarding software is available on the Internet at:
http://www.gossenmetrawatt.com
( Products Software Software for Testers)
Data Storage / Report Generating Accessories
Thermal printer for printing out test re-
ports; inkl. manual on CD, Lithium-Batte-
rie, power supply adapter, mains cable,
USB cable, 1 role of Thermopaper Z721S Z721S
Thermo paper for Z721S; 10 roll of thermo
paper, Ø 12/50mm, 30 m x 112 mm, coat-
ing outside Z722S Z722S
Barcode and label printer including soft-
ware, for USB connection to the PC or test
instrument
SECUTEST BASE(10) or XTRA
Z721D Z721D
Label set for Z721D barcode and label
printer (quantity x width: 3 x 24, 1 x 18, 1 x
9 mm, length: 8 m each) Z722D Z722D
Label set for Z721D barcode and label
printer (qty. x width: 5 x 18 mm, 8 m long
each) Z722E Z722E
Barcode scanner for USB connection
Z751A Z751A
See also separate ID systems data sheet regarding barcode scanners and printers.
Accessory Probes, Sensors, Adapters and Cables
Probe cable with test probe and 2 m probe
cable (not coiled), 300 V CAT II 16 A PC2 Z745D
Probe cable with test probe and 2 m probe
cable (coiled), 300 V CAT II 16 A SK2W Z745N
5 m probe cable for protective conductor
measurement, 300 V CAT II 16 A PC5 Z745O
Brush probe Z745G Z745G
Adapter for testing single-phase extension
cables including earth contact and inlet
plug inserts EL1 Z723A
Test adapter with single and 3-phase plug
connectors up to CEE 32A
– For all tests per DIN VDE without line
voltage at single and 3-phase electrical
devices
– For tests per DIN VDE at single
and 3-phase extension cords VL2E Z745W
Adapter for connecting DUTs:
3-pole 16 A, 5-pole 16 A + 32 A,
5 ea. 4 mm socket
– For all tests per DIN VDE without
line voltage at single and 3-phase
electrical devices CEE Adapter Z745A
3-phase 16 A differential current adapter
AT16-DI Z750A
3-phase 32 A differential current adapter
AT32-DI Z750B
Cable set for connecting test instruments
to the mains without using a an earthing
contact outlet, and for connecting DUTs.
Consists of coupling socket with 3 perma-
nently connected cables, 3 measurement
cables, 3 plug-on pick-up clips and 2 plug-
on test probes. KS13 GTY3624065P01
Additional Accessories
Calibration adapter for test instruments per
DIN VDE 0701-0702/IEC 62353
(VDE 0751) (max. 200 mA) cannot be
used for 10 A protective conductor test
current SECU-cal 10 Z715A
Test adapter in combination with
SECUTEST... for testing welding units per
DIN EN 60974-4:2007.
The peak value for open circuit voltage is
determined in the SECULOAD by means of
a peak value rectifier with very fast diodes.
As a result, the actual peak value for open-
circuit voltage is also read out for pulsed
voltage sources with cycle rates within a
range of several 10 kHz in consideration of
the filter stipulated in the standard.
Includes 4 measurement cables and 2 alli-
gator clips. SECULOAD Z745V
Test adapter in combination with
SECUTEST... for testing welding units per
DIN EN 60974-4:2007.
The peak-value rectifier in the SECULOAD-
N uses the 1N4007 rectifier diode recom-
mended in the standard.
This is a mains rectifier diode which, due to
its design, is only suitable for voltage
sources with low cycle rates within the
range of the line frequency, or voltage
sources with conventional transformer.
Includes 4 measurement cables and 2 alli-
gator clips. SECULOAD-N Z745R
Plastic system case SORTIMO L-BOXX Z503D
Foam insert
for SORTIMO L-BOXX with divi-
der for SECUTEST BASE(10) or XTRA
Foam SORTIMO
L-BOXX Secutest4 Z701D
Carrying pouch for all SECUTEST... instru-
ments without HV module
F2000
D
Z700D
Designation Type Article number