Datasheet

GMC-I Messtechnik GmbH 7
SECUTESTBASE, BASE10 and XTRA
Test Instruments for Measuring Electrical Safety of Devices
Accessories (not included)
Z751A Barcode Reader
For connection to
the USB master
port at the SECUT-
EST BASE(10)/XTRA
test instrument,
and for reading in
barcodes. This
makes it possible
to conveniently
insert the ID numbers of DUTs into single measurements and test
sequences.
This device is based upon the concept of an instinctive scanning
distance and provides best possible reading performance at dis-
tances of up to 20 cm. Green Spot technology provides a “good-
read” projection directly on the code. The device is equipped with
a USB port.
Z721S Thermal Printer
For connection to
the USB master
port at the SECUT-
EST BASE(10)/X
TRA
test instrument,
and for printing out
test reports.
EL1 Adapter for Testing Single-Phase Extension Cables
CEE Adapter for Testing Single and 3-Phase Electrical Devices
The Z745A CEE adapter allows for quick and efficient testing of
devices equipped with a CEE plug. The adapter is equipped with
the following CEE flush-type socket outlets: 5-pole 16 A, 5-pole
32 A and 3-pole 16 A. Furthermore, the adapter includes five
4 mm safety sockets to which 3-phase devices without perma-
nently attached plug or conventional measurement cables can be
connected, e.g. by means of quick clamp terminals (not included).
The following tests can be performed on devices with CEE plugs
with the help of the adapter:
• Testing of protective conductor continuity
•
Insulation resistance, alternatively leakage current (equivalent
leakage current)
• Function test (3-pole CEE outlet only)
The Z745A CEE adapter may also be used as an adapter for con-
necting devices with 3-pole CEE plugs to common earthing con-
tact outlets.
AT16-DI (Z750A) 3-Phase 16 A Differential Current Adapter
Devices which
are equipped
with a 5-pole,
16 A / 6 h
CEE plug can
be quickly and
efficiently
tested with the
AT16-DI CEE
adapter.
The following
tests can be
performed on
devices with
CEE plugs
with the help
of the AT16-DI
CEE adapter:
• Testing of protective conductor continuity
• Insulation resistance, alternatively leakage current (equivalent
leakage current)
• Measurement of protective conductor resistance with the fol-
lowing methods:
equivalent leakage current / differential current / direct
• Function test
This differential current adapter is also available in a variant with a
5-pole 32 A / 6 h CEE plug with the designation AT32-DI CEE
adapter.
SECU-cal 10 Calibration Adapter
The calibration adapter is used for testing the measuring uncer-
tainty of test instruments in accordance with DIN VDE 0701-0702
/ IEC 62353 (VDE 0751). As a rule, these instruments must be
tested once each year, as well as for certification in accordance
with the ISO 9000 quality standard, as set forth by accident pre-
vention regulation BGV A3 (previously VBG 4).
All limit values for the required tests per DIN VDE, as well as pro-
tective conductor resistance, insulation resistance, equivalent
leakage current, differential and/or touch as well as housing leak-
age current, must be tested.