Datasheet
3-349-753-03
4/2.14
GMC-I Messtechnik GmbH
SECUTESTBASE, BASE10 and XTRA
Test Instruments for Measuring Electrical Safety of Devices
per VDE 0701-0702, IEC 62353 and IEC 60974-43
DQS Certified per
DINENISO9001
Quality Management System
Features
• State-of-the-art, multi-channel measuring technology for fast
measured value acquisition. Measured values are acquired via
16 channels simultaneously, so that all measured values are
available at the same time.
• Active (direct) measurement of leakage current from the appli-
cation part via the test probe with an option for selecting the
phase angle to mains power.
• Quick export of the database
• The test list view provides an outline of all executed tests
along with their results and respective evaluations.
• Multiple measurement is a user-optimized measuring process
which allows for convenient recording of several measuring
points.
• Quick execution of the most important functions via “direct
selection lists”
• Direct printout of test reports or test report management with
free ETC software
Standards for the Use of SECUTEST BASE, BASE10 and
XTRA Test Instruments
Testing after Repairs /
Periodic Testing
DUTs to be tested
in accordance
with the following
standards
DIN VDE 0701-0702
IEC 62353:2007
DIN EN 62353:2008
(VDE 0751-1)
IEC 60974-4
DIN EN 60974-4
VDE 0544-4
Electric devices
Work devices
Mains operated electronic devices
Hand-held electric tools
Extension cords
Household appliances
Data processing devices
Electrical medical devices,
application parts
Welding units
• 8 pre-set test sequences per standard
to perform standardized Tests
for electrical, medical and welding instruments
one freely configurable test sequence for special duties
• Automatic evaluation of executed test sequences
in consideration of measuring uncertainty
• Pioneering operating concept with double rotary switch,
direct selection keys and softkeys
• Revolutionary data management and storage concept
for automated test sequences and single measurements
with memory for up to 50,000 data records
• Automatic DUT connection and protection class detection
• Voltage measurement up to 300 V for testing SELV/PELV circuits
• Measurement of leakage current with a bandwidth
of up to 1 MHz
• Compact, impact resistant housing with integrated rubber
protector