Operation Manual

28 GMC-I Messtechnik GmbH
Initial Start-Up – Setup
Quick Charging the Batteries
Charging of the battery pack can be started at any time with this
function.
4.11 Establishing a LAN Connection to the test system
Application
The test system is capable of communicating with any PC (Win-
dows, Linux or Mac)
, assuming both are connected to a LAN, or if
the two devices are directly connected with a LAN cable :
• For remote controlling tests (full functionality)
• For reading out test results
• For generating hard copies
Attention!
!
Remote control of the test system should always be coordi-
nated with the user, who is in contact with the test system at
the same time, for example in order to exclude the possibil-
ity of contact hazards
IP Address
Net Mask