Operation Manual

GMC-I Messtechnik GmbH 105
Automatic Test – Administration
Note

The test step specifications are added in the order in which
they are clicked.
Ð Change the order of the test steps with the keys if
required.
Ð Individual test steps can be saved as a new test specification
with the button.
Ð Individual test steps can be deleted with the symbol.
Object Types Index Card
Ð Object types can be assigned to a test sequence if required.
All devices under test which correspond to this object type are
then automatically tested with the respective test sequence.
Note

Creation of a new test sequence can be exited at any time
by pressing the ESC key. Entries are ignored.
Ð Add the new test sequence to the catalog by tapping Save .