Operation Manual

90 GMC-I Messtechnik GmbH
Automatic Test – Administration
7.3.3 Catalog of DUTs
In order to be able to execute an automated test sequence, a de-
vice under test must be entered under its ID number along with its
data, and the associated test sequence must be entered in the
catalog of DUTs.
DUTs from this catalog can be used when entering deadlines for
periodic testing (deadline administration).
ID Unique number:
– May only be used once
– No blanks or special characters at the beginning or
end of the number
Designation
Designation from the catalog of designations
(see section 7.3.1)
Manufacturer
The manufacturer’s name (see section 7.3.2)
Type Manufacturer-specific type designation within a
device category from the catalog of object types
(see section 7.3.2)
Entering a New DUT
When a new data record is entered, an object hierarchy must first
be selected if more than one has been activated (see also section
4.11.10).
Basic attributes such as ID no., designation, manufacturer and object
type (type) should always be entered for the identification of a
device under test; an error message will otherwise appear. Make
sure that the ID number has not already been assigned to another
object. The catalog symbol at the beginning of the entry field
DUTs
New