Operation Manual

GMC-I Messtechnik GmbH 85
Automatic Test – Administration
Scrolling through the Monitor Display – Searching for Entries
If more catalog entries are included than can be displayed at the
screen, tap the arrows to access hidden entries.
7.3 DUT Administration
Devices under test are entered and assigned to customers and
locations, and the test sequences with which the DUTs must be
tested are set up with the object administration function.
General Procedure for Entering New DUTs
We recommend sticking to the following order:
1. Enter test steps  section 7.4.2
2. Create the sequence  section 7.4.3
3. Enter customers  section 7.6.1 and locations  section 7.6.2 *
4. Enter the object  section 7.3.3
5. Enter the deadline  section 7.5 on page 106 *
* Customers, deadlines and locations can also be created while entering
an object.
To top of page
To bottom of page
Scroll back 10 pages
Scroll forward 10 pages
Bottom = top of page
Less than 10 pages remain
3 Number of pages to be scrolled forward or back
Less than 10 pages remain
Top = bottom of page
Scroll forward 1 page No more pages
Scroll back 1 page No more pages
is entered by directly selecting the desired page.
Alphanumeric search (binoculars icon)
(entry with correct decimal place beginning at left)
Object
Administration