Operation Manual

GMC-I Messtechnik GmbH 3
Contact Persons
Recalibration Service
We calibrate and recalibrate all instruments supplied by GMC-I Ser-
vice GmbH, as well as other manufacturers, at our service center,
for example after one year within the framework of your test
equipment monitoring program, as well as prior to use etc. (see
address on page 3).
Repair and Replacement Parts Service
Calibration Center* and Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nürnberg, Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
www.gmci-service.com
This address is only valid in Germany. Please contact our
representatives or subsidiaries for service in other countries.
DAkkS Calibration laboratory for measured electrical quantities,
D-K-15080-01-01, accredited in accordance with
DIN EN ISO/IEC 17025:2008
Accredited quantities: direct voltage, direct current value, direct current
resistance, alternating voltage, alternating current value, AC active
power, AC apparent power, DC power, capacitance, frequency and
temperature
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with
DIN EN ISO 9001:2008. Our DAkkS calibration lab is accredited by
the Deutscher Kalibrierdienst (German Calibration Service) in ac-
cordance with DIN EN ISO/IEC 17025 under registration number
D-K-15080-01-01.
We offer a complete range of expertise in the field of metrology:
from test reports and factory calibration certificates, right on up to
DAkkS calibration certificates.
Our spectrum of offerings is rounded out with free test equipment
management. Our service department includes an on-site DAkkS
calibration bench. If errors are discovered during calibration, our
specialized personnel are capable of completing repairs using
original replacement parts. As a full service calibration lab, we can
calibrate instruments from other manufacturers as well.