Operation Manual

14 GMC-I Messtechnik GmbH
Operating Overview – Connections
Connections
Reset key In the event that the system no longer reacts, briefly
press the recessed button with the stylus (at the back
of the Prüfsystem to the left of the Ethernet port).
Ethernet 10 RS 232 (internal)
USB-Sl
USB2
Compact flash II
USB1
USB3 USB4
Connection for mains operation
Connections for probes
Standard socket (test
socket) for connecting the DUT
S1 S2
-------USB-Master-------
for printer or sensor
USB slave, to PC (option)
Slot for memory
card
Wand holder
Reset key
for rebooting the test system
Fuse
Connection for probe
PSG10 (Z745Y)
Connection Application
Top connections
Standard socket Test socket with safety class detection
Ethernet 10 Network connection, 10 MBit
CF slot For inserting compact flash II memory cards
USB1 USB master, e.g. for keyboard, printer, barcode scanner or
500 mA sensor
USB2 USB3 USB4 USB master, e.g. for keyboard, printer, or sensor, 100 mA
USB-SI USB slave, to PC (in preparation)
RS232 Interface, for service only
Bottom connections
Sockets 1 and 2 Test probe connection (max. 300 V CAT II)
Sockets 3 and 4 Current sensor connection, 1 mV/mA (max. 300 V CAT II)
Inlet socket Supply power connection (90 to 240 V, 50 to 400 Hz)
Connection Application