Operation Manual

GMC-I Messtechnik GmbH 109
Automatic Test – Administration
7.5.3 Catalog of Intervals
All predefined intervals are displayed in the “Intervals” menu. An
interval generates the deadline of the next test in the case of auto-
matic carry forward function.
Size and
Type Indicates the length of the interval
Carrying
Forward
Indicates whether or not a new deadline will be set
based on the specified interval after saving the test.
In the setup menu under item „Tests“, it must be spec-
ified as to whether and, if so, on which conditions
automatic carrying forward is to be performed.
Entering a New Interval
You can enter intervals here which remind you to execute mea-
surements at predetermined times. The size and the type of inter-
val must be entered to this end. Depending on the type of auto-
matic carry forward function that has been activated, a new dead-
line is set after the test is saved to memory.
We recommend saving newly entered intervals at regularly with
the help of the Backup function in the Setup menu (see
sec-
tion 4.11.3
) or via the data export function as an XML file which is in-
dependent of a version, see section 7.7.6 .
Changing Intervals
The listed intervals can be changed with respect to “size”, “type”
or “carrying forward” by clicking the respective cell.
Deleting Intervals
In order to delete existing designations, they must first be marked
in the catalog by activating the respective checkboxes.
Intervals
New