Operation Manual

104 GMC-I Messtechnik GmbH
Automatic Test – Administration
Creating New Test Sequences „in the copy“
After marking a test sequence and activating the “New” button
, the sub-points “New as Copy” and “New” appear. You can
use an existing test sequence as a template with the help of the
“New as Copy” function, edit it and save it as a new test se-
quence.
Editing a Test Sequence
Test sequences and their respective test steps can be selected for
editing from a catalog of previously entered test sequences by se-
lecting the respective line. If the parameters of a test step are
changed, all test sequences of the same type are effected as well.
All objects which have already been assigned to a device under
test are thus affected by the modification. However, the corre-
sponding test step specification remains unchanged (see also “Ed-
iting a Test Step Specification” in section 7.4.2).
Deleting a Test Sequence
In order to delete existing test sequences, they must first be marked in
the catalog by activating the respective checkbox.
Short-form Operating Instructions
Creating a Test Sequence
Ð Create a new test sequence: .
Test Sequence, “New as Copy”
Ð Select the desired test sequence and activate the “New”
button .
The sub-points “New” and “New as Copy” appear above the
“New” button.
Ð Select “New as Copy”.
Ð Edit the designation and the test step as required.
Basic Data Index Card
Ð Standard: Enter the name of the standard or regulation
Ð Designation: Enter a designation for identification/archiving
Ð Description: A comment can be entered if required.
Ð Form: Reserved
Test Steps Index Card
Ð Select add test step.
A catalog of all test step specifications is displayed.
Ð Mark the desired test steps.
Ð All selected test steps are added to the new test sequence by
tapping OK.
New in the copy