Operation Manual

100 GMC-I Messtechnik GmbH

Automatic Test – Administration

Parameter Index Card

Ð Select whether or

not voltage is

applied to the test

socket during visual

inspection.

Select whether or not

voltage will be switched

off after visual inspec-

tion (if selected above).

Note



Entry of a new visual inspection can be exited at any time by

pressing the ESC key. Entries are ignored.

Ð Add the new visual inspection to the catalog by tapping Save

Test Step Specification – Test Instruction

Test instructions appear as a text display before the next respec-

tive test step. These texts may include instructions for executing

the next test step, or a warning.

Short-form Operating Instructions

Entering a Test Instruction

Ð Enter a new test step: .

Ð Select test instruction.

Ð Designation: Enter a designation for identification/archiving

Class Measurement (pre-selection)

Ð Test instruction: Enter the desired text.

Ð Description: A comment can be entered if required.

Note



Entry of a new test instruction can be exited at any time by

pressing the ESC key. Entries are ignored.

Ð Add the new test instruction to the catalog by tapping Save .