Operation Manual

GMC-I Messtechnik GmbH 69
22.4 Device Return and Environmentally Compatible Disposal
The test instrument is a category 9 product (monitoring and control instru-
ment) in accordance with ElektroG (German Electrical and Electronic De-
vice Law). This device is subject to the RoHS directive. Furthermore, we
make reference to the fact that the current status in this regard can be ac-
cessed on the Internet at www.gossenmetrawatt.com by entering the
search term WEEE.
We identify our electrical and electronic devices in accordance
with WEEE 2012/19/EU and ElektroG with the symbol shown
to the right per DIN EN 50419.
These devices may not be disposed with the trash.
Please contact our service department regarding the return of old de-
vices, address see chapter 23.
23 Repair and Replacement Parts Service
Calibration Center* and Rental Instrument Service
If service is required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Strasse 20
90471 Nürnberg · Germany
Phone [phone]
Fax [phone]
E-Mail [e-mail]
www.gmci-service.com
This address is only valid in Germany.
Please contact our representatives or subsidiaries for service in other
countries.
* DAkkS Calibration Laboratory for Electrical Quantities
D-K-15080-01-01 accredited per DIN EN ISO/IEC 17025:2005
Accredited measured quantities: direct voltage, direct current values,
DC resistance, alternating voltage, alternating current values, AC active power,
AC apparent power, DC power, capacitance, frequency and temperature
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with
DIN EN ISO 9001:2008.
Our DAkkS calibration laboratory is accredited by the Deutsche Akkredi-
tierungsstelle GmbH (National accreditation body for the Republic of Ger-
many) in accordance with DIN EN ISO/IEC 17025:2005 under registration
number D-K-15080-01-01.
We offer a complete range of expertise in the field of metrology: from test
reports and proprietary calibration certificates right on up to DAkkS calibration
certificates.
Our spectrum of offerings is rounded out with free test equipment manage-
ment.
An on-site DAkkS calibration station is an integral part of our service depart-
ment. If errors are discovered during calibration, our specialized personnel
are capable of completing repairs using original replacement parts.
As a full service calibration laboratory, we can calibrate instruments from
other manufacturers as well.