Operation Manual

74 GMC-I Messtechnik GmbH
Automatic Test – Individual Test Sequences
Editing Function
The editing icon appears at the end of each object line. The
editing mode can be entered for the respective device under test
by tapping this icon. In this way, DUT data can be edited and
saved shortly before testing without having to switch to the ad-
ministration menu. See section 7.3.3.
Filter Function
The filter icon in the object type, customer or location field
means:
You have preselected an object type, customer or a location.
Only those objects are listed in the „Objects“ index card which
comply with the respective criteria.
Ð Select the object type, customer or location field with gray
background in order to set a filter.
Ð First mark the desired designation, followed by the object type
and customer, and then the location.
Ð Acknowledge your entry with “OK”.
Ð The selected entry can be unselected by tapping it once again.
Cancelling Object Type, Customer and Location Selection – Display All
Test Objects
If you want to undo the pre-selection for the displayed object
type, customer or location, select once again in the filter selection
the „Designation“ and „Object type „ or „Customer“ and „Loca-
tion“ field which is already framed with a bar so that the bar disap-
pears, and acknowledge by tapping the OK button.