Operation Manual

GMC-I Messtechnik GmbH 27
Initial Start-Up – Setup
4.10.4 Printer
Here you can search for the printer to be connected to the USB
port.
Report
A logo can be loaded into the Secustar which will then be printed
on the test report.
The logo must meet the following requirements:
• png format
• RGB colors or palette colors
• maximum file size: 400 kB
• at least 100 x 100 pixels
• maximum dimensions: 2,400 pixels wide and 900 pixels high
4.10.5 User Interface Language
Selection can be made here amongst various languages for the
user interface. English, German, French and Dutch user interfaces
are currently available.
The layout of the internal softkey keyboard, or an external key-
board which has been connected to the USB port, is automati-
cally adapted to the selected user interface language.
Note: When using a barcode scanner, the modified character co-
ding must be adjusted.
4.10.6 Setting Date and Time
Date and time can be entered here. The respective data are save
automatically after they have been entered:
Date (DD.MM.YYYY)
Time (hh:mm:ss)
You can switch back and forth between the display of date and
time by tapping the respective entry in the header. The date
4.10.7 System Information
The versions of the various software modules are listed here.
4.10.8 Energy Options
Standby Time in Minutes
A time is specified here in minutes after which the test system is
shut down automatically, if none of the keys or the touch screen
have been activated during this time.
Designation / Version
2