Operation Manual

SECULIFE IF+
OPERATIONS
CONNECTING CHAMBERS
Chambers are connected to the base unit with a straight through 8Pin Mini Din male to 8Pin Mini Din
Male cable. Chambers can be connected or disconnected at any time. Disconnecting a chamber while
a test is running will cancel the test.
As a chamber is connected or disconnected, the display will change to display the available chambers.
For example, if a test is running on Channel 1 and a second Chamber is plugged into Channel 2, the
display will automatically change to the dual display mode.
If both chambers are connected and Chamber 1 is removed, the display will automatically change to the
large screen displaying Chamber 2.
NOTE: The screen can always be manually changed by using the keys.
GMC-I Messtechnik GmbH 17