Operation Manual

SECULIFE IF+
KEYS
Six tactile-touch keys are provided for system operation:
– This key turns the unit off and on. The unit will return to the screen that was active when it
was turned off.
– In the DISPLAY MODE, these keys toggle the display through the available main
screens.
In the SELECT MODE, if a parameter has been highlighted, these keys with scroll through the
available settings.
– On the Setup screen, there are a number of parameters that may be selected and
changed. This key sequences the cursor (Highlight) through those parameters.
– This key is used to STOP any of the running flow tests or to manually reset the system if
Auto Test Reset is set to NO. (See Setup Section for more details.)
– This key toggles the unit into and out of the Setup Mode. Depressing this key will enter the
Setup screen where the configuration can be viewed and adjusted. Depressing the key again will exit the
Setup Mode and return to the previously viewed main screen.
GMC-I Messtechnik GmbH 11