Operation Manual

8
TEMPERATURE SCALE – The temperature scale is indicated by the units displayed under
the reading. The scale can be changed by using to highlight the unit line and
to toggle the temperature units between Degrees Celsius (°C) and Fahrenheit
(°F).
NOTE: If the measured temperature is outside of the range of the instrument, an OVER
RANGE or UNDER RANGE message box will be displayed. For models with the YSI
option, the NO PROBE message box will be displayed when the unit detects an open
connection. For models with the RTD option, the OVER RANGE message box will also be
displayed with an open connection.
SYSTEM SETUP – The Setup Mode allows the user to adjust the configuration of the
meter. The Setup screen can be entered using the key. The parameters can be
to highlight the line and to toggle the available changed by using
options. The Setup screen can be exited using the key.
Typical display with
“No Probe” message
box.
NOTE: YSI option only