Operation Manual

7
PRESSURE SCALE – The pressure scale is indicated by the units displayed under the
reading. The scale can be changed by using to highlight the unit line and
to toggle between available pressure units as listed below.
NOTE: If the measured pressure is outside of the range of the instrument, an OVER
RANGE or UNDER RANGE message box will be displayed.
Pressure Units
PSI
mmHg @ 0 °C
inH
2
O @ 4 °C
mmHg @ 20 °C
inH
2
O @ 20 °C
kg/cm
2
inH
2
O @ 60 °F
kPa
cmH
2
O @ 20 °C
mBar
inHg @ 0 °C
Bar
inHg @ 20 °C
Typical display with
“Over Range”
message box.
Input Identification Screen
Note: Sensor limits are
displayed based on
selected range.