Operation Manual

4
Several tactile-touch keys are provided for system operation.
– The function of this key is dependent on the Current Operating Mode as follows:
POWER OFF – If this key is pressed while the power is turned OFF, the power will
be turned ON
PRESSURE MEASUREMENT – If this key is pressed while the pressure is being
displayed, the Setup Mode will be entered.
SETUP MODE – Pressing this key while in the Setup Mode will sequence the
display through the available parameters.
– The function of this key is dependent on the Current Operating Mode as follows:
PRESSURE MEASUREMENT – If this key is pressed while the pressure is being
displayed, the power will be turned OFF
SETUP MODE – Pressing this key while in the Setup Mode will exit the Setup Mode
and automatically save all settings.
MIN/MAX MODE – Pressing this key when a MIN or MAX Value is being displayed
(MIN or MAX key is held down) will cause that value in that capture register
to be reset to the current reading.
KEYS