Operation Manual

GMC-I Messtechnik GmbH 21
SECULIFE DF
BASE
High Level Output (+)
A high level ECG output signal (200 X Amplitude Setting) is available on the RCA jack located on the
rear of the unit.
Serial Port
A female 9-pin D-Sub connector is provided for the connection of the unit to a PC or laptop serial port (e.g.
Com 1). This link is then used for either remote control or flash downloading of software upgrades.
Parallel Port
A female 25-pin D-Sub connector is provided for the connection of a printer via a Centronics parallel
interface.
Oscilloscope Output
A BNC connector is provided to connect an oscilloscope to the unit. This output is a 200:1 attenuated
version of the input to the Defibrillator Plates.