Manual

84 GMC-I Messtechnik GmbH
Index card TEST SEQUENCE
The test sequence index card is used to assign text sequences to the selected object.
Several test sequences can be assigned to one object.
The view of assigned test sequences is shown in a list. A marked checkbox in the column STANDARD indicates the test sequence with
which the object is to be tested.
The test sequences themselves are managed in a parent sequence pool; refer to “Sequences function”.
Sequence steps
Users can show the details (individual steps) of a sequence by double-clicking on the sequence or by marking the sequence and then
selecting the symbol . This opens a list of sequence steps, which is shown instead of the sequence list.
Users return to the original screen by selecting the symbol .
Functions of the toolbar – index card for a TEST SEQUENCE
Save changes
Discard changes (with prompt)
Show sequence details (if the user is in the sequence list)
Show sequence list (if the user is in the sequence detailed view)
Add sequences from the sequence pool
Delete sequence assignment; the sequence itself remains present in the sequence pool.
Manage attachments (add, display and delete a file/photo)
Print, refer to “Print”
This index card is a list, so the functions of the list view will apply; the list symbols will be active in the toolbar as well; refer to “Lists”.
Index card TESTS
The index card for tests is used to manage and create tests for the selected object. The view of assigned tests conducted is shown in
a list.
The tests listed here are created in a variety of ways:
– Import of measurements from the test device or from a file
– Direct execution of tests by different methods
Test details – show elements with lower hierarchy
Users can show the details of a test by double-clicking on the test or by marking the test and then selecting the symbol . This
opens the detailed view for the test. If a “+” symbol is placed in front of the line, additional information is available by selecting the sym-
bol or by double-click, whereby users can switch between MEASURED VALUES and PARAMETERS.
Users return to the original screen by selecting the symbol .
Direct execution of tests
Selecting the tool symbol opens the popup “Add Test”, which offers the following options:
Note
Deleting only removes the link, but not the sequence. The sequence
remains present in the sequence pool.