Manual

GMC-I Messtechnik GmbH 45
Location tree
The registered locations are shown in a hierarchical form here. Test objects can be assigned to these locations, although it is not man-
datory. The location tree has the 4 defined hierarchy levels of property, building, level and room. It is not mandatory to use all levels of
the hierarchy.
Selected position in the location tree
Interdependency of the tree structures
A test object can be linked to precisely one object in the location tree (although this is not necessary).
In contrast, an object in the location tree may be connected to several test objects in the electric tree. When a location is marked in the
location tree, all elements in the electric tree that are situated at this location will be marked in green.
When a test object is selected in the electric tree, its assignment to a particular location is shown by a green marking on the corre-
sponding location object.
Connection logic for the tree elements
By selecting an object in a particular tree, the tree to which it is assigned will become the active tree. As described above, this is indi-
cated by a green border around the tree window and a bold green bar at the top. Only one object can be marked in the active tree. By
doing so, the symbol and text color of the object turn green, and the matching line is shaded in gray.
In the other tree, the matching elements are indicated by the color of the symbol and text turning green. The parent objects are always
indicated by a green symbol, while the color of the text remains white.