Manual
Table Of Contents
- 1 System requirements for local and client installation
- 2 Versions of IZYTRONIQ
- 3 Downloading BUSINESS and CLOUD Variants
- 4 Initial installation of BUSINESS Starter / Advanced / Professional / Premium
- 5 Initial installation of the ENTERPRISE Variant
- 6 Licensing
- 7 Update
- 8 Uninstallation
- 9 Login / Logout
- 10 Basics of operation
- 11 Home screen
- 12 Main modules
- 12.1 Module for portable objects
- 12.2 Module for stationary objects
- 12.3 Test device management
- 12.4 User management
- 12.5 Recycle bin
- 12.6 Settings
- 12.7 Synchronization (ENTERPRISE Ultimate only)
- 12.8 Help
- 13 Lists
- 14 Print
- 15 Document management
- 16 PUSH/PRINT
- 17 Sequence editor
- 18 Automatic process control for a test – remote function
- 19 Working in multi-user mode (floating license)
- 20 Data replication using the server
- 21 Editing report templates
- 22 SECUTEST/SECULIFE ST – first steps
- 23 PROFITEST – first steps
- 24 METRAHIT – first steps
- 25 NEXONIQ
- 25.1 License – Right of Utilization – Activation
- 25.2 Download
- 25.3 System Requirements of Local and Client Installation
- 25.4 Setup of User Interface
- 25.5 Reading out data from test instruments the formats of which are not compatible with IZYTRONIQ
- 25.6 Data import from ETC file
- 25.7 Importing the converted files into IZYTRONIQ
- 26 VIDEOS – Tutorial
- 26.1 “Sequence editor”Function “Input, change, list” – Portable Objects
- 26.2 Structure of the index cards – portable objects
- 26.3 File import – portable objects
- 26.4 Conflict manager – portable objects
- 26.5 Function “Input, change, list” – stationary objects
- 26.6 Structure of the index cards – stationary objects
- 26.7 Management and creation of test instruments
- 26.8 User management – BUSINESS Version except Premium variant
- 26.9 Global settings
- 26.10 Catalogs
- 26.11 Lists
- 26.12 Generation of test report
- 26.13 Push/Print
- 26.14 Sequence editor
- 26.15 Editing report templates
GMC-I Messtechnik GmbH 147
18.2 Processes with remote steps
Some test devices have a remote control function. This is used by IZYTRONIQ to send the test device a control command that then exe-
cutes the selected measurement.
• The test device is connected with the PC by USB or Bluetooth interface.
• The test device is shown in the dashboard under “TEST DEVICE MANAGEMENT”.
• The test device must support the remote function (e.g. test devices SECUTEST, SECULIFE).
18.3 Processes with push/print steps
Some test devices and multimeters support a push/print function. The sequence editor can be used to insert the test steps for pushed/
print into the overall process.
Where push/print test steps are included in the process, the program checks whether a push/print-capable test device is connected to
the interface before executing the respective push/print step.
• The test device is connected with the PC by USB or Bluetooth interface.
• The test device is shown in the dashboard under “TEST DEVICE MANAGEMENT”.
• The test device must support the remote function (e.g. test devices PROFITEST PRIME, METRAHIT IM XTRA, SECUTEST, SECU-
LIFE).
Attention!
A CPU operating at full capacity may cause data loss if measured values
are transmitted simultaneously (polling). A worst case, that is possibly rel-
evant, may not be recorded as a consequence, which, in turn, may lead
to a wrong test result. Any programs which are running in the back-
ground and stressing the CPU excessively should therefore be deacti-
vated during remote operation if possible.
Attention!
Only start the measurements at your test instrument if you have visual
contact with the DUT and the test instrument. Do not apply line voltage
to the test socket of your SECUTEST or SECULIFE test instrument
unless the surroundings are protected.