Datasheet

PROFITEST MBASE+, MTECH+, MPRO, MXTRA, SECULIFE IP
DIN VDE 0100/IEC 60364-6 Testers
18 GMC-I Messtechnik GmbH
Ever-ready case for PROFITEST MASTER (Z502X)
Order Information
Designation Type Article Number
PROFITEST MASTER Instrument Variants
Universal protective measure test instruments for DIN VDE 0100 per EN 61557, parts 1, 2,
3, 4, 5, 6, 7 and 10 with integrated memory and insulation measurement up to 1000 V,
mains powered earthing resistance measurements,
Automatic test sequence function . See
page 2 for a detailed overview of performance features and page 9 for scope of delivery.
Basic Instrument PROFITEST MBASE+ M520S
Same as basic instrument plus the
following special functions:
– (Rechargeable) battery powered
measurements:
Earthing resistance (3/4-wire)
Soil resistivity
Selective earthing resistance
Earth loop resistance PROFITEST MPRO M520N
Same as basic instrument plus the
following special functions:
– Tripping test for AC/DC sensitive
RCDs and loop impedance measure-
ment without tripping the RCD
– Bluetooth
®
interface PROFITEST MTECH+ M520R
Same as basic instrument plus
numerous special functions:
– Tripping test for AC/DC sensitive
RCDs and loop impedance measure-
ment without tripping the RCD
– Testing of IMDs
– Testing of RCMs per EN 61557,
part 11
– (Rechargeable) battery powered
measurements:
Earthing resistance (3/4-wire)
Soil resistivity
Selective earthing resistance
Earth loop resistance
– Leakage current measurement
– Residual voltage test
– Intelligent ramp
– Bluetooth
®
interface PROFITEST MXTRA M520P
Same as basic instrument plus
numerous special functions:
– Tripping test for AC/DC sensitive
RCDs and loop impedance measure-
ment without tripping the RCD
– Leakage current measurement
– Testing of IMDs
– Bluetooth
®
-interface SECULIFE IP M520U
back front with test instrument
(scope of delivery without test instrument)
Test Instrument Power Supply Accessories
8 LSD NiMH rechargeable batteries with
reduced self-discharging (AA),
2000 mAh with sealed cells
MASTER Battery Set Z502H
Broad-range charger for charging
batteries included in the
PROFITEST
MBASE+ MTECH +,
MPRO, MXTRA
and
SECULIFE IP
Input: 100 to 240 V AC
Output: 16.5 V DC, 1 A
PROFITEST MASTER
Charger Z502R
Accessory Plug Inserts and Adapters
Earth contact plug insert (Schuko):
D, A, NL, F etc. PRO-Schuko GTZ3228000R0001
same as PRO-Schuko, however with
angled earth-contact plug PRO-W Z503A
Plug insert per SEV: CH PRO-CH GTZ3225000R0001
Plug insert
with adapters for GB & USA PRO-GB/USA-Set Z503B
Plug insert for South Africa PRO-RSA Z501A
2/3-pole measuring adapter for 3-
phase and rotating-field systems,
300 V/1 A CAT IV with safety cap
600 V/1 A CAT III with safety cap
600 V/16 A CAT II without safety cap PRO-A3-II Z501O
same as PRO-A3-II, however with
straight cables of 10m each instead
of coil cables PRO-A3-II ncc Z503C
Set-Probes CAT III / 600 V, 1 A, wor-
king range of the probes 68 mm –
diameter 2,3 mm Set-Probes Z503F
Flat test clip for fast and safe con-
tacting on busbars. Powerful con-
tacting on the front and rear of the
busbars by means of established
Multilam. Fixed Ø 4 mm socket in
the pressure grip handle section, to
fit spring-loaded Ø 4 mm plugs with
rigid insulating sleeve.
1000 V CAT IV/32 A PRO-PE Clip Z503G
2 magnetic measurement contacts
with contact protection – Set with
magnetic holder, measurement con-
tacts 5,5 mm in diameter insulated,
CAT III 1.000 V / 4 A, temperature
between –10 °C and 60 °C,
under
standard conditions and flat-head
screws holding force 1.200 g vertical
to contact area;
measuring instrument
connector: 4 mm sockets for PRO-A3-II
Set 3 – Magn. Measuring
Tips
Z502Z
With 10 m cable based on 2-wire mea-
suring technology for PE and similar
measurements, 300 V / 16 A CAT IV
PRO-RLO-II Z501P
With 3 connector cables for any connec-
tion standards, 300 V / 16 A, CAT IV
PRO-UNI-II Z501R
5-pole 3-phase adapter for 16 A
CEE outlets A3-16 GTZ3602000R0001
5-pole 3-phase adapter for 32 A
CEE outlets A3-32 GTZ3603000R0001
5-pole 3-phase adapter for 63 A
CEE outlets A3-63 GTZ3604000R0001
Variable Plug Adapter Set Z500A Z500A
Calibration adapter for testing of the accu-
racy of measuring instruments for insula-
tion resistance and low-value resistors
ISO Calibrator 1 M662A
Leakage current measuring adapter
for PROFITEST MXTRA and
SECULIFE IP PRO-AB Z502S
Designation Type Article Number