Operation Manual

GMC-I Messtechnik GmbH 57
Evaluation
In order to evaluate the measurement, it must be stopped. This
applies to manual as well as automatic measurement. Press the
“START” or “ESC” key to this end. The stopwatch is stopped and
the evaluation window appears.
Press the “NOT OK”, “START” or “ESC” key in order to reject the
measurement.
Retrieving Saved Measured Values
The measured value cannot be saved to memory and included in
the test report until it has been evaluated (see also section 16.4).
With the help of the key shown at the right
(MW: measured value / PA: parameter), the setting
parameters can be displayed for this measurement.
OK
NOT OK