Datasheet

PROFITESTINTRO
Tester, IEC 60364-6 / DIN VDE 0100-600
6 GMC-I Messtechnik GmbH
Overload Capacity
U
L-PE
, U
L-N
600 V continuous
RCD, R
E
440 V continuous
Z
L-PE
, Z
L-N
550 V (Limits the number of measurements
and pause duration. If overload occurs, the
instrument is switched off by means of a
thermostatic switch.)
R
LO
Electronic protection prevents switching
on if interference voltage is present.
Protection with
2 fine-wire fuses FF 3.15 A 10 s,
Fuses blow at > 5 A
Electrical Safety
Protection class II per IEC 61010-1/EN 61010-1/
VDE 0411-1
Nominal voltage 230/400 V (300/500 V)
Test voltage 3.7 kV 50 Hz
Measuring category CAT III 600 V or CAT IV 300 V
Pollution degree 2
Fuses
L and N terminals 1 cartridge fuse-link ea.
FF 3.15A/600V 6.3 x 32 mm
Electromagnetic Compatibility (EMC)
Product standard EN 61326-1:2013
Ambient Conditions
Accuracy 0 ... + 40 C
Operation –5 ... + 50 C
Storage –20 ... + 60 C
(without batteries)
Relative humidity
Max. 75% (max. 85% during storage/
transport) no condensation allowed
Elevation Max. 2000 m
Calibration interval 1 year (recommended)
Mechanical Design
Display Multiple display with dot matrix,
128 x 128 pixels,
backlit (transflective),
dimensions: 65 x 65 mm
Dimensions W x L x D: 225 x 130 x 140 mm
Weight Approx. 1.5 kg with batteries
Protection Housing: IP 52,
measurement cables and connectors:
IP 40 per EN 60529/DIN VDE 0470-1,
housing category 2
Excerpt from Table on the Meaning of IP Codes
Data Interfaces
Type USB slave for connection to a PC
Type RS-232 for barcode and RFID readers
Scope of Delivery
1Test instrument
1Shoulder strap
1Battery pack
1 KS-PROFiTEST INTRO (Z503L)
1USB cable
1 Factory calibration certificate
1 Condensed operating instructions
1 Supplementary sheet with safety information
– Comprehensive operating instructions available on the Inter-
net for download at www.gossenmetrawatt.com
KS-PROFiTEST INTRO (Z503L)
Measurement cables (black, blue, yellow-green) with test probe
and safety caps (CAT IV 300 V, CAT III 600 V), as well as alligator
clips (CAT III 1000 V)
Interference emission Class
EN 55022 A
Interference
immunity
Test Value Feature
EN 61000-4-2 Contact/atmos. –
4 kV/8 kV
EN 61000-4-3 3 V/m
IP XY
(1
st
digit X)
Protection Against
Foreign Object Ingress
IP XY
(2
nd
digit Y)
Protection Against
Penetration by Water
4  1.0 mm dia. 0 Not protected
5 Dust protected 2 Dripping (at 15 angle)