Datasheet
GMC-I Messtechnik GmbH 11
PROFITESTINTRO
Tester, IEC 60364-6 / DIN VDE 0100-600
Order Information
Designation Type Article Number
Instrument for testing the effective-
ness of safety measures in electrical
systems per DIN VDE 0100-600 and
VDE 0413, with integrated memory,
RINS up to 1000 V, R LOW, Z L-PE,
Z L-N, RE, as well as type A, AC, B,
B+, F, EV and MI RCCBs
See detailed overview of included
features on page 2.
See cope of delivery on page 6. PROFITEST INTRO M520T
Starter package PROFiTEST INTRO,
consisting of PROFiTEST INTRO
(M520T), PRO-Schuko-Measuring-
Adapter (Z503K), PRO-Jumper
(Z503J), Universal Carrying Pouch
F2010 (Z700G), Battery Pack Master
(Z502H) and charger (Z502R)
Starter package PROF-
ITEST INTRO M503A
Master package PROFiTEST INTRO,
consisting of PROFiTEST INTRO
(M520T), Test probe with remote re-
lease (Z550A), Vario-Plug-Set
(Z500A), Set-Probes (Z503F), PRO-
Schuko-Measuring-Adapter
(Z503K), PRO-Jumper (Z503J),
SORTIMO L-BOXX (Z503D), Foam
SORTIMO L-BOXX (Z503O), Battery
Pack Master (Z502H) and charger
(Z502R)
Master package PROF-
ITEST INTRO M503B
Test Instrument Power Supply Accessories
Compact Accu-Pack consisting of 8 re-
chargeable batteries 2000 mAh in two
plastic caps for Profitest Master / INTRO,
METRISO XTRA, SECULIFE IP
Compact Battery Pack Z502H
Charger METRISO / PROFITEST / SE-
CULIFE IP with 6,3 / 2,5 plug; with
mains plug for EU, GB, automatic
charging set for 4-8 NiCD/NiMH bat-
terycells, wide range input 100 ...
240 V AC, output 4,8 ... 12 V
Charger METRISO /
PROFITEST Z502R
Accessory Plug Inserts and Adapters
Country-specific single-phase mea-
suring adapter for the
PROFITEST INTRO
, earthing contact
plugs to three 4 mm safety plugs
(black, blue, yellow-green),
230 V AC, touch-guarded, measur-
ing category: CAT III, 300 V, 16 A
PRO-Schuko Measuring
Adapter
Z503K
Country-specific single-phase, mea-
suring adapter for the PROFiTEST
INTRO, earthing contact plugs to
three 4 mm safety plugs (black,
blue, yellow-green), 230 V AC,
touch-guarded, measuring cate-
gory: CAT III, 300 V, 16 A
PRO-CH Measuring
Adapter Z503M
Country-specific single-phase mea-
suring adapter for the PROFiTEST
INTRO, earthing contact plugs to
three 4 mm safety plugs (black,
blue, yellow-green), 230 V AC,
touch-guarded, measuring cate-
gory: CAT III, 300 V, 16 A
PRO-GB Measuring Adapter
Z503N
Measurement cables (black, blue,
yellow-green) with test probe and
safety caps for 600 V CAT III / 300 V
CAT IV, as well as alligator clips for
1000 V CAT III KS-PROFiTEST INTRO Z503L
Country-specific touch-guarded
short-circuit adapter for the
PROFITEST INTRO
for measuring cable
compensation PRO-JUMPER Z503J
Country-specific touch-guarded
short-circuit adapter for the
PROFITEST INTRO
for measuring cable
compensation PRO-JUMPER-CH Z503P
Country-specific touch-guarded
short-circuit adapter for the
PROFITEST INTRO
for measuring cable
compensation PRO-JUMPER-GB Z503R
Test probe with measurement key
and an additional key for illuminating
the measuring point, including
shielded connector cable and test
probe holder for the carrying strap
Test probe for remote
triggering
METRISO-PROFITEST Z550A
Set of test probes (red/black)
CAT III / 600 V, 1 A, test probe work-
ing range: 68 mm – diameter:
2.3 mm Probe set Z503F
Flat test clip for contacting busbars
quickly and safely. Good contact at
the front and back of the busbar
thanks to time-tested contact
blades. Rigid 4 mm socket in the
handle, suitable for the insertion of
spring-loaded 4 mm plugs with rigid
insulating sleeve.
1000 V CAT IV/32 A PRO-PE Clip Z503G
Telescoping rod for RLO and RISO
measurement, CAT III 600 V / CAT IV
300 V, 1 A, retracted/extended 53,3
cm/120 cm, 190 g
TELEARM 120
D
Z505C
Telescoping rod for RLO and RISO
measurement, CAT III 600 V / CAT IV
300 V, 1 A, retracted/extended 73,5
cm/180 cm, 250 g
TELEARM 180
D
Z505D
Triangular probe for floor measure-
ments in accordance with EN 1081
and DIN VDE 0100 1081 Probe GTZ3196000R0001
2 magnetic test probes with touch pro-
tection – set including magnetic
holder, 5.5 mm measuring contact di-
ameter, insulated, CAT III 1000 V / 4 A,
temperature from -10 to 60 °C, holder
power under standard conditions with
flat head screws: 1200 g perpendicu-
lar to the contact surface; measuring
instrument connection for PRO-A3-II
via 4 mm sockets
Set 3–magnetic test
probes Z502Z
5-pole 3-phase adapter
for 16 A CEE outlets A3-16 GTZ3602000R0001
5-pole 3-phase adapter
for 32 A CEE outlets A3-32 GTZ3603000R0001
5-pole 3-phase adapter
for 63 A CEE outlets A3-63 GTZ3604000R0001
VARIO Plug Adapter Set Z500A Z500A
Calibration adapter for testing the
accuracy of measuring instruments
for insulation resistance and low-
value resistors ISO Calibrator 1 M662A
Accessories for Low-Resistance Measurement
Reel with 25 m measurement cable TR25 Reel GTZ3303000R0001
Drum with 50 m measurement cable TR50 drum GTY1040014E34
Designation Type Article Number